FSD Dodge Cummins T4 S400 Hi-Mount Second Gen Swap Piping Kit 2003-2018

FSD

 

This is Full Send Diesel’s Hi-Mount 2nd Gen Swap kit. This kit is made completely out of Stainless Steel so it will not rust, leaving it raw, unpowdercoated is an option! Our kits feature a 1 piece intercooler pipe so that there is one less boot that can cause issues like leaking or blowing off. You have the option to add a vibrant HD Clamp which highly recommend for high boost and extreme applications where the engine will be flexing. What makes our kit extra special is that all of our kits come standard with a V Band intake. We take the extra steps to weld a 5” V band to the turbo cover and then one to the intake so that they can be V banded together with the supplied V band clamp, eliminating the rubber boot and two clamps. We do offer the boot and clamp setup as a cheaper more budget friendly option. This not only looks cleaner, but it is much sturdier! This kit comes with everything you need to install besides the turbo and manifold. It is designed for a steed speed manifold but will work with most 40* manifolds like Ronin, Stainless diesel and DPS. If you purchase your turbo charger off of our website, we will weld the V band onto the compressor cover for free! If you purchase the kit and have a turbo already and would like to send it in, there will be a $150 charge to weld the v band on and powdercoat (If Selected) it to match the rest of the kit. If you select that you would like to have it powdercoated, after we receive your order we will contact you shortly after to work one on one with you to find the exact powdercoat color that you would like. As always, we back our products because they are nothing other then the highest quality. All of our turbo piping kits come with a lifetime warranty. If you are looking to increase the performance of your Cummins, this kit is for you! If you would like a standard low mount turbo kit, compound setup, triple turbo setup or any other custom turbo set up, Please do not hesitate to reach out to us as we LOVE doing ONE-OFF kits for our great customers who want to be different! For more info on the kit please watch our video in the description below!

 

 

 

Whats Included?

  • (1)Full 4 Inch Downpipe and Clamp (4.62”Flange)
  • (1) Air Filter and Clamp
  • (1) FSD Stainless Braided Turbo Feed Line and Fittings
  • (1) FSD Stainless Braided Turbo Feed Line and Fittings
  • (1) One-Piece Stainless-Steel Charge Pipe With Clamp and O ring ( OR a 2 piece with vibrant HD clamp assembly if selected)
  • (1) CAC Boot
  • (2) Breeze CAC Boot Clamps
  • (1) Stainless Steel IAT Bung
  • (1) Stainless Steel MAP Sensor Bung (6.7 Cummins Only)
  • (1) Stainless Steel Manifold Stud Set
  • (1) Set of Turbo mounting Studs and Nuts (Extra-long For Manifold Spacer)
  • (6) Metal Manifold Gaskets
  • (2) Metal T4 Divided Flange Gaskets
  • (1) T4 1” manifold Spacer
  • (1) Stainless Steel Intake Pipe

 

 

Features-

  • 1 Piece Intercooler Pipe ( OR a 2 piece with vibrant HD clamp assembly if selected)
  • 1 Piece V Banded 5” Intake ( If selected)
  • Complete Stainless-Steel Kit (Will never rust!)
  • Precision Tig welded in House
  • Lifetime Warranty
  • Stainless-Steel AN Braided Oil Lines
  • Billet Fittings
  • Billet Spacer
  • 5 Ply CAC Boots
  • Stainless Steel Mounting Hardware

 

***NOTE

 **** The vibrant HD Clamp assembly is HIGHLY recomended for high HP or hi boost applications where the engine may flex greatly. We have steered away from the cheaper alternative ( Bellows) welded into the pipe because in high pressure applications they can stretch out. ******IF YOU DO NOT SELECT THE HD CLAMP ASSEMBLY YOU WILL RECEIVE A 1 PIECE INTER COOLER PIPE WITH NO BELLOW****

**** NOTE

6.7 Cummins require a CCV reroute as well as a coolant reroute kit, these are not included in our kit.

 

Turbo Sizing?-

5.9 Cummins----

 

  • S464/83/.90 or 1.0-Quick Spool with Stock or Mild Fueling (700 HP with Added fuel and supporting mods)
  • S467/83/.90 or 1.0-Slightly laggier with Stock Fueling)- Okay for daily driving but gives you room to grow when you decide to add fuel (800 HP with added fuel and supporting mods-Recommended fuel 30%-100% injectors)
  • S472/87/1.0 900 HP capable with added fuel and supporting mods-Recommended fuel 80%-150% injectors)
  • S475-S478-87/1.0 1000+ HP Capable with added fuel and supporting mods-Recommended fuel 100%-250% injectors)

 

6.7 Cummins----

  • S464/83/.90 or 1.0-Quick Spool with Stock Fueling) 700 HP capable with Added fuel and supporting mods-Recommended fuel Stock-60% injectors)
  • S467/83/.90 or 1.0-Quick Spool Stock Fueling)- Quick Spool on stock fuel with good custom tuning-(800 HP with added fuel and supporting mods-Recommended fuel Stock-100% injectors)
  • S472/83 or 87/.90 or 1.0 900 HP capable with added fuel and supporting mods-Recommended fuel 80%-150% injectors)
  • S475-S478-87/1.0 1000+ HP Capable with added fuel and supporting mods-Recommended fuel 100%-250% injectors)

 

Full Send Diesel LLC

 

https://www.youtube.com/watch?v=t2_1q-4-sLI

 

Please Call for Availability
908-246-8943
Availability: Kits take between 1-3 weeks to ship.

Note

-Shortly After you order, we will contact you to figure out what color you would like everything powdercoated.
-2007.5 + 6.7 Cummins will require a coolant riser delete kit. We sell these on our website.

Details

Shipping Information

  • Item Requires Shipping
  • 80.0 lbs.
  • W25.0000” x H35.0000” x L35.0000”
  • Free Ground shipping on orders over $150.00 ( Lower 48 States) some exclusions may apply

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.