This is the pre-fabbed and wrinkled black powder coated part (custom powder available) for adding a bombproof crossover steering kit to your 4x4 dana 60 king pin style front axle (and an optional tie rod) utilizing beefy 7/8 heim joints instead of traditional tie rod ends. This is for your 72-93 dodge truck with 2-6 inches of lift, we have zero to 1 inch of lift too. All huge 1.5 inch 1/4 wall tube. Good looking and stronger than your truck needs.
Necessary but not included:
2” Lift - Pitman Arm (Good for 2-3” of lift)
4” Lift - Pitman Arm (Good for 3-6” of lift)
Requires shortening the existing steering input shaft or a new, improved u-joint steering input shaft to replace the craptacular factory pot joint.
A highly recommended option to simplify the steering box relocation and strengthen this application and your trucks frame at its most vulnerable location is our steering box brace
Dana 60 High Steer Arm and Stud Kit w tapered nuts
Crossover Drag link, wrinkle black powder, bent and welded -1.5" X .25" wall DOM tubing
Loaded set of RH & LH 7/8 Heim with 3/4 steering/safety misalignments
3/4” mounting bolts
Crossover with Tie Rod adds;
Tie rod, welded -1.5" X .25" wall DOM tubing
Loaded set of LH & LH 7/8 Heim with 3/4 tie rod misalignments
3/4 mounting bolts (requires drilling your knuckles out to 3/4” straight)
Unfortunately, crossover steering necessitates sway bar removal. You wont miss it.
A great option at this time would be our dana 60 steering stabilizer setup CLICK HERE Buy selecting the proper kit, the tie rod mount can be integrated as a weld in fitting in the tie rod.
Due to the race type application heim joints, even though they are stronger than anything else available and are safe enough for racers, this should be considered an off road part.