FSD’s bolt on traction bar frame mounts are the easiest way to install a set of traction bars on your truck. These will bolt onto to your 3” frame seamlessly giving you a way to attach a traction bar with a firm grip. Our mounts ensure zero movement under load & are built with the strongest of materials right here at our shop in Bangor, PA. Light drilling is required, see the installation instructions below.
Features:
- No Welding
- Grade 8 Hardware Included
- Laser Cut
- CNC Bent
- 1/4” Mild Steel Construction
- Lifetime workmanship warranty
- Made in the USA
- 304 Stainless Steel Overlays
Fitment:
- Fits 3” Wide boxed Frames
- 2 5/8” Inside Mounting Width for 2 5/8” Heim Joints
- 3/4” Traction Bar Mounting Bolts
For traction bars with a 2 5/8” mounting width & a 3/4” bolt hole.
What’s Included ?
- (2) 3” Frame Mounts
- (10) 3/8” x 1” Flange Bolts
- (10) 3/8” - 16 Threaded Inserts
- (2) Grade 8 3/4”-10 x 5” Long Bolts
- (2) Grade 8 3/4”-10 Nylon Lock Nuts
- (4) Grade 8 3/4” Washers
- (2) 304 Stainless Steel Overlays
Frame Mount Installation:
- Hold the frame mount up where you would like to mount it.
- Mark & drill the top 3 holes using a 17/32nd Drill bit (0.531”).
- Install the (3) 3/8” -16 Nutserts.
- Bolt the bracket to the frame using the (3) 3/8" Bolts.
- Make sure that there are no gaps between the bracket & frame.
- Mark & drill the bottom 2 holes using a pilot bit.
- Remove the top 3 bolts.
- Remove the bracket
- Drill the 2 bottom holes using a 17/32nd Drill bit (0.531”).
- Install both bottom threaded inserts using a threaded insert tool.
- Reinstall bracket loosely
- Evenly tighten all 5 bolts using red high strength lock tight.
- Repeat on the other side.
POWDER COAT OPTION:
-If you select the custom powder coat option, we will contact you to assist with choosing your preferred powder color from the Prismatic Powders online selection.
NOTE: Brackets come raw steel & need to be painted or Powdercoated. Pictures are for visual purposes only.