📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 12
Bilstein

Bilstein B1 1999 BMW 328i Base Front Mounting Kit

SKU: BIL12-248940
$58.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

Bilstein B1 OE Replacement components are direct replacement suspension parts for your vehicle. These components can extend the operating life of your vehicle and its suspension system, including protective dust boots to prevent your shocks and struts from being damaged, and strut mounts to keep your struts firmly in place. Each of these components plays a crucial role in ensuring a long and safe life for your vehicle.

Installation Instructions
Warranty
Warranty
Installation Instructions
Warranty
  • Original Bilstein service parts are built to high OE quality standards
  • Broad ranges of support bearings for virtually any type of car
  • Manufactured to perfectly fit with Bilstein shock absorbers
  • Includes Strut Mounts

This Part Fits:

Year Make Model Submodel
2008-2013 BMW 128i Base
2008-2013 BMW 135i Base
2000 BMW 323Ci Base
1999-2000 BMW 323i Base
2001-2006 BMW 325Ci Base
2001-2006 BMW 325i Base
2001-2005 BMW 325xi Base
2000 BMW 328Ci Base
1999-2000,2007-2012 BMW 328i Base
2001-2006 BMW 330Ci Base
2001-2006 BMW 330i Base
2001-2005 BMW 330xi Base
2009-2011 BMW 335d Base
2007-2012 BMW 335i Base
2011-2012 BMW 335is Base
2001-2007 BMW 525i Base
2006-2007 BMW 525xi Base
1998-2000,2008-2010 BMW 528i Base
2009-2010 BMW 528i xDrive Base
2008 BMW 528xi Base
2001-2007 BMW 530i Base
2006-2007 BMW 530xi Base
2008-2010 BMW 535i Base
2009-2010 BMW 535i xDrive Base
2008 BMW 535xi Base
1998-2003 BMW 540i Base
2004-2005 BMW 545i Base
2006-2010 BMW 550i Base
2010 BMW 550i GT Base
2004-2005 BMW 645Ci Base
2006-2010 BMW 650i Base
2013-2015 BMW X1 sDrive28i
2012-2015 BMW X1 xDrive28i
2013-2015 BMW X1 xDrive35i
2004-2005 BMW X3 2.5i
2004-2006 BMW X3 3.0i
2007-2008 BMW X3 3.0si
2009-2010 BMW X3 xDrive30i

Customer Reviews

Overall rating: 4.7 / 5 from 528 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕