📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 5
Energy Suspension

Energy Suspension Ball Joint Boot - Red

SKU: ENG9.13130R
$7.99
  • Make: Universal

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

Repair torn and worn-out boots of suspension tie rod ends - without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5-point sealing action. Choose from four sizes and round or octagon styles. Made of Energy's Hyper-Flex(TM) performance polyurethane for added performance and durability.

  • Made of Energy's Hyper-Flex™ performance polyurethane
  • Adds durability surpassing most OEM rubber boots
  • Exclusive 5-point sealing action
  • Superior Material
  • Easy To Install
  • Lasts Longer
  • Looks Great

This Part Fits:

Year Make Model Submodel
1988 Chevrolet Camaro Base
1982-1986 Chevrolet Camaro Berlinetta
1985-1990 Chevrolet Camaro Iroc-Z
1987 Chevrolet Camaro LT
1989-1992 Chevrolet Camaro RS
1992 Chevrolet Camaro RS Heritage Edition
1982-1987 Chevrolet Camaro Sport
1982-1987,1991-1992 Chevrolet Camaro Z28
1992 Chevrolet Camaro Z28 Heritage Edition
1982 Chevrolet Camaro Z28 Indianapolis 500 Pace Car
2006-2008 Dodge Ram 1500 Laramie
2006-2008 Dodge Ram 1500 SLT
2008 Dodge Ram 1500 SXT
2003,2005-2009 Dodge Ram 2500 Laramie
2006-2009 Dodge Ram 2500 Power Wagon
2003-2009 Dodge Ram 2500 SLT
2006-2007 Dodge Ram 2500 Sport
2003-2009 Dodge Ram 2500 ST
2008-2009 Dodge Ram 2500 SXT
2006-2007 Dodge Ram 2500 TRX4
2003-2010 Dodge Ram 3500 Laramie
2003-2010 Dodge Ram 3500 SLT
2006-2007 Dodge Ram 3500 Sport
2003-2010 Dodge Ram 3500 ST
2008-2009 Dodge Ram 3500 SXT
2007 Dodge Ram 3500 TRX4
1979-1981,1994-2004 Ford Mustang Base
1981 Ford Mustang Cobra
1979-1981 Ford Mustang Ghia
1982-1983 Ford Mustang GL
1982-1983 Ford Mustang GLX
1982-2004 Ford Mustang GT
2001 Ford Mustang GT Bullitt
1984 Ford Mustang GT-350 20th Anniversary
1995 Ford Mustang GTS
1982-1984 Ford Mustang L
1984-1993 Ford Mustang LX
2003-2004 Ford Mustang Mach 1
1993-1999,2001,2003-2004 Ford Mustang SVT Cobra
2003 Ford Mustang SVT Cobra 10th Anniversary
1993,1995,2000 Ford Mustang SVT Cobra R
1983 Ford Mustang Turbo GT
1983-1988 Ford Thunderbird Base
1984-1986 Ford Thunderbird Elan
1984-1985 Ford Thunderbird Fila
1983 Ford Thunderbird Heritage
1983-1988 Ford Thunderbird LX
1983-1988 Ford Thunderbird Sport
1983-1988 Ford Thunderbird Turbo
1986 Mercury Capri 5.0
1979-1983 Mercury Capri Base
1982-1983 Mercury Capri Black Magic
1983 Mercury Capri Crimson Cat
1979-1980 Mercury Capri Ghia
1981-1986 Mercury Capri GS
1982-1983 Mercury Capri L
1982-1985 Mercury Capri RS
1984 Mercury Capri RS Turbo
1981-1986 Mercury Cougar Base
1982 Mercury Cougar GS
1982-1986 Mercury Cougar LS
1980-1982,1984-1986 Mercury Cougar XR-7
1983-1986 Mercury Marquis Base
1983-1986 Mercury Marquis Brougham
1982-1992 Pontiac Firebird Base
1989-1992 Pontiac Firebird Formula
1982-1986 Pontiac Firebird S/E
1982-1992 Pontiac Firebird Trans Am
1989-1992 Pontiac Firebird Trans Am GTA
1989 Pontiac Firebird Trans Am GTA SE

Customer Reviews

Overall rating: 4.7 / 5 from 527 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕