📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 2
XDP Xtreme Diesel Performance

XDP OER Series Fuel Contamination Kit (Without CP4 Pump) XD611 2011-2014 Ford 6.7L Powerstroke

SKU: XD611
$3,522.95

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

The XDP Fuel System Contamination Kit - No Pump (Stock Replacement) XD611 will help you get your truck back on the road. The factory CP4 injection pump in the Super Duty trucks is known as a common failure point in the fuel system and often fails in a disastrous manner.

As a result, debris from a CP4 failure contaminates the fuel injectors, fuel injector lines, fuel rails, and many other components throughout the entire fuel system. To repair the failed pump and eliminate the risk of contaminating the replacement parts, all the parts mentioned must then be replaced.

Simply flushing the fuel system doesn't ensure that all the residual metal shavings or debris will be removed from the system. This XDP OER Series Fuel Contamination Kit is a great replacement for your Powerstroke engine with a failed CP4 fuel injection pump, water in the fuel tank, or DEF contamination.

This XDP OER Series Fuel Contamination Kit includes all the major components to get your truck back on the road but allows you to choose your own high pressure pump such as the S&S Diesel 6.7F-DCR CP4 To DCR Conversion. Other components included with this kit are fuel injectors, fuel injector lines, fuel rails, and much more.

Swapping out all of these components will help ensure that all the high-pressure pump remains are out of the fuel system. This will ensure that the replacement components won't get contaminated from the previous pump failure.

Features:

  • (1) Fuel Return Line
  • (8) Fuel Injector Lines
  • (1) CP4 Pump Installation Kit
  • (8) Fuel Injector Hold Down Bolts
  • (2) Genuine Bosch Fuel Rails With Sensors
  • (8) Genuine Bosch Remanufactured Fuel Injectors

Customer Reviews

Overall rating: 4.7 / 5 from 525 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

Customer photo review of XDP Wrinkle Black HD High Output Alternator 1999-2003 Ford 7.3L Powerstroke XD356

Had this thing for just over a month now. My 7.3 had the small housing alternator from factory so I needed to use the spacers. Using the spacers makes the belt slightly harder to get back on so I would recommend going up 1/2" on the belt size. Otherwise I have no issue, powers the truck just fine for the last 1000 miles.

Gunther B. 4/5 Verified

XDP Wrinkle Black HD High Output Alternator 1999-2003 Ford 7.3L Powerstroke XD356

⌕