Certified G56 Installer Program
The G56 manual conversion module for 2019-2022 Ram 2500 and 3500 Cummins trucks. Engineered in-house over three years, with minimal, fully reversible wiring. Park, Reverse, Neutral, Drive and cruise control stay fully functional. Sold only through 100 certified installer shops across the United States and Canada, each trained directly by Kevin Kubinak.
Featured in Diesel Army: "The First Fully Functional G56-Backed Fifth-Gen Ram" →
Two Modules. Every 2019-2022 Ram 2500 and 3500.
AS69RC and 68RFE Conversion Modules
There are two separate modules: one for trucks with the factory Aisin AS69RC and one for trucks with the factory 68RFE. The AS69RC module requires no tuning at all. The 68RFE module requires tuning and can be 100% emissions compliant. Both integrate with only a few factory circuits, are fully reversible, and ship with complete installation documentation.
- Fits
- 2019-2022 Ram 2500 and 3500 Cummins
- Modules
- Two separate modules: Aisin AS69RC and 68RFE
- Tuning
- AS69RC: no tuning required. 68RFE: tuning required, can be 100% emissions compliant.
- Retained functions
- Park, Reverse, Neutral, Drive and cruise control
- Not included
- 40A 12V relay, shift linkage, shift extension, shift knob
- Availability
- Certified installer shops only. 3+ years of in-house R&D.
Billet Center Console and Shift Linkage
Produced in limited quantities. To order or reserve, contact Joe at joe@fullsenddiesel.com or 908-223-9744.
Engineered in Nazareth, PA
Trained by Kevin. Supported on Every Swap.
Every certified shop is trained directly by Kevin Kubinak, one-on-one, on both the AS69RC and 68RFE conversions, so each swap is done properly and every customer gets an exceptional result. Kevin stays with your shop through every part of the swap, not just the module.
- Module integration and wiring, AS69RC and 68RFE
- Console and shifter modifications
- Identifying the correct parts for each truck
- Sourcing every part, down to the bell housing adapter, clips, clutch pedal and transfer case
- Direct access to Kevin Kubinak for any questions on the swap
This is what certification includes, and it is what you are investing in as a Certified G56 Installer.
Official Certification
Every certified shop receives a numbered Certificate of Authorization from Full Send Diesel, issued at enrollment and ready to frame. Shown here is the certificate held by our own facility, Full Send Diesel Performance and Repair.
Certified shops are also published in our installer directory on fullsenddiesel.com, so 2019-2022 Ram 2500 and 3500 owners looking for this conversion can find you directly.
Certified Installer Directory

Certificate FSD-G56-0001
Full Send Diesel Performance and Repair
Owner: Ryan Vought
300 Industrial Dr, Nazareth, PA 18064

Certificate FSD-G56-0002
Pratt Performance Design
Owner: Grant Pratt
Honesdale, PA 18431 (by appointment)
99 spots open
Claim yours
Program Benefits
Limited to 100 Shops
Certification is capped at 100 shops across the United States and Canada. Certified shops can order both the AS69RC module and the 68RFE module.
Directory Listing
Your shop, logo and contact details published in our certified installer directory, alongside a framed Certificate of Authorization.
Trained by Kevin Kubinak
Every certified shop is trained directly by Kevin, one-on-one, covering module integration, console and shifter modifications, and the complete parts list, down to the bell housing adapter, clips, clutch pedal and transfer case.
Preferred Pricing
Your first module is purchased at full retail. Every module after that is 15% off.
Enrollment
- 1
Enter your shop details
Business information, ownership, point of contact and logo for your directory listing.
- 2
Choose and purchase your first module
Pick the AS69RC or 68RFE module at the bottom of the form and check out. Checking out secures your certification. There is no approval process or waiting period.
- 3
Receive your certificate
Your numbered Certificate of Authorization is emailed to you right after checkout.
- 4
Training with Kevin
One-on-one training to properly install and complete the swap, the complete parts list, and your directory listing.
Enroll Your Shop
Certification is first come, first served. There is no approval process: the first 100 shops to complete enrollment and purchase their first module (AS69RC or 68RFE) receive certification, are trained directly by Kevin Kubinak to properly install and complete these swaps, receive their certificate by email, and are added to our installer directory.