📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 7
aFe

aFe 18-22 Jeep Wrangler JL (4-Door Models w/ 3-Piece Hard-Top Only) Terra Guard Tub Rail Covers

SKU: AFE79-25001
$197.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

When the factory hardtop is removed, the revealed surface is left exposed and can be easily scratched, or damaged. aFe POWER has a solution that is both ruggedly tough, and off-road inspired to help protect the surface and enhance the look of your vehicle. On-road or off-road, the unique tire tread design and aFe POWER logo, repels any condensation, splashes, or spills to drain to the outside of the vehicle and not to the inside. The unique textured surface helps with grip when accessing top mounted storage containers or scouting the trail ahead. The Terra Guard Tub Rail Covers are constructed of a durable rotomolded polymer material that is both scratch and UV resistant so it can survive anything the trail throws at it. XLPE (Cross-linked Polyethylene) is not a paintable material. Engineered using 3D laser scanning and CAD software, the Tub Rail Covers are designed for a perfect fit. Although all vehicles are not built the same, the oversized mounting holes allow for precise placement to align with your vehicle’s door jams before securely fastening into place for a perfect fit and finish. Terra Guard Tub Rail Covers should be installed when the factory hard top is removed. This quick installation will ensure the painted body tub rail surface is never exposed long enough to be damaged. Whether using the factory hardware or the optional Stainless Steel security screws, both can be stored into the same factory tray holder in the back of the Jeep, so they are never misplaced. An optional stainless-steel security hardware kit is available, P/N: 79-90001. Stainless-steel provides good strength and corrosion resistance in bad environments like high temperature, cold weather and high humidity areas. The low-profile design sits flush with the tread pattern of the Tub Rail Covers, and the tamper-proof design requires a special tool that is included in the kit.

Installation Instructions
  • Terra Guard Tub Rail Covers quickly and easily protect exposed body tub rail surfaces adding a finished look when you remove your JLU’s hard top.
  • Uses Factory Mounting Locations and Hardware – Optional Stainless Steel Security Hardware Kit Available
  • Unique Tire Tread Pattern with Spill Groove Prevents Water from Entering the Vehicle
  • Protects the Exposed Painted Surface when Hard Tops are Removed
  • Durable, Scratch and UV Resistant Polymer Material
  • Fits 4-door models w/ 3-piece hard top only

This Part Fits:

Year Make Model Submodel
2023 Jeep Wrangler Freedom
2023 Jeep Wrangler High Altitude
2023 Jeep Wrangler High Tide
2022-2023 Jeep Wrangler Rubicon
2023 Jeep Wrangler Rubicon 392
2023 Jeep Wrangler Sahara
2023 Jeep Wrangler Sahara Altitude
2022-2023 Jeep Wrangler Sport
2023 Jeep Wrangler Sport Altitude
2022-2023 Jeep Wrangler Sport S
2021 Jeep Wrangler Unlimited 80th Anniversary
2021 Jeep Wrangler Unlimited Freedom
2021-2022 Jeep Wrangler Unlimited High Altitude
2022 Jeep Wrangler Unlimited High Tide
2021 Jeep Wrangler Unlimited Islander
2018-2019 Jeep Wrangler Unlimited Moab
2018-2022 Jeep Wrangler Unlimited Rubicon
2021-2022 Jeep Wrangler Unlimited Rubicon 392
2018-2022 Jeep Wrangler Unlimited Sahara
2021-2022 Jeep Wrangler Unlimited Sahara Altitude
2018-2022 Jeep Wrangler Unlimited Sport
2021-2022 Jeep Wrangler Unlimited Sport Altitude
2018-2022 Jeep Wrangler Unlimited Sport S
2021-2022 Jeep Wrangler Unlimited Willys
2021-2022 Jeep Wrangler Unlimited Willys Sport
2023 Jeep Wrangler Willys
2023 Jeep Wrangler Willys Sport

Customer Reviews

Overall rating: 4.7 / 5 from 527 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕