📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 8
aFe

aFe Silver Bullet Throttle Body Spacer 10-14 Chevrolet Camaro V6 3.6L

SKU: AFE46-34010
$146.99
  • Make: Universal

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

Installation Instructions
  • Helps Air/Fuel Charge Burn Completely
  • Durable 6061-T6 Billet Aluminum
  • 2 Year Limited Warranty
  • Serrated/Helix Design
  • Increased Horsepower
  • Creates Turbulence
  • Increased Torque
  • Removes Whistle

This Part Fits:

Year Make Model Submodel
2013-2016 Cadillac ATS Luxury
2013-2016 Cadillac ATS Performance
2013-2016 Cadillac ATS Premium
2017-2019 Cadillac ATS Premium Luxury
2017-2019 Cadillac ATS Premium Performance
2016-2019 Cadillac ATS V
2008-2009,2011-2014 Cadillac CTS Base
2010,2014-2019 Cadillac CTS Luxury
2010-2016 Cadillac CTS Performance
2010-2016 Cadillac CTS Premium
2017-2019 Cadillac CTS Premium Luxury
2014 Cadillac CTS Vsport
2014 Cadillac CTS Vsport Premium
2017-2019 Cadillac XT5 Base
2017-2019 Cadillac XT5 Luxury
2017-2019 Cadillac XT5 Platinum
2017-2026 Cadillac XT5 Premium Luxury
2020-2026 Cadillac XT5 Sport
2019 Chevrolet Blazer Base
2020-2025 Chevrolet Blazer LT
2019-2025 Chevrolet Blazer Premier
2019-2025 Chevrolet Blazer RS
2010-2015,2017-2018 Chevrolet Camaro LS
2010-2024 Chevrolet Camaro LT
2012-2014 Chevrolet Caprice PPV
2015-2022 Chevrolet Colorado LT
2015-2022 Chevrolet Colorado WT
2015-2022 Chevrolet Colorado Z71
2017-2022 Chevrolet Colorado ZR2
2013-2014 Chevrolet Equinox LT
2013-2014 Chevrolet Equinox LTZ
2012-2013 Chevrolet Impala LS
2012-2014 Chevrolet Impala LT
2012-2014 Chevrolet Impala LTZ
2012-2013 Chevrolet Impala Police
2014 Chevrolet Impala Limited LS
2014 Chevrolet Impala Limited LT
2014 Chevrolet Impala Limited LTZ
2014 Chevrolet Impala Limited Police
2010-2012 Chevrolet Malibu LT
2010-2012 Chevrolet Malibu LTZ
2010-2014 Chevrolet Traverse LS
2010-2014 Chevrolet Traverse LT
2010-2014 Chevrolet Traverse LTZ
2009-2010 Dodge Dakota Big Horn
2007,2010 Dodge Dakota Laramie
2009-2010 Dodge Dakota Lone Star
2007-2008 Dodge Dakota SLT
2008 Dodge Dakota Sport
2007-2010 Dodge Dakota ST
2008 Dodge Dakota SXT
2008 Dodge Dakota TRX
2008-2009 Dodge Dakota TRX4
2010-2011 Dodge Nitro Heat
2009-2011 Dodge Nitro SE
2007-2009 Dodge Nitro SLT
2007-2008,2010-2011 Dodge Nitro SXT
2007-2010 Dodge Ram 1500 ST
2008 Dodge Ram 1500 SXT
2020-2023 GMC Acadia AT4
2019-2023 GMC Acadia Denali
2019-2021,2023 GMC Acadia SLE
2019-2023 GMC Acadia SLT
2018-2020 GMC Canyon All Terrain
2021-2022 GMC Canyon AT4
2015-2020 GMC Canyon Base
2017-2022 GMC Canyon Denali
2021-2022 GMC Canyon Elevation
2021-2022 GMC Canyon Elevation Standard
2015-2020 GMC Canyon SLE
2015-2020 GMC Canyon SLT
2006 Jeep Commander 65th Anniversary Edition
2006-2007 Jeep Commander Base
2007-2009 Jeep Commander Sport
2007-2009 Jeep Grand Cherokee Laredo
2007 Jeep Liberty Limited
2007 Jeep Liberty Sport
2007 Mitsubishi Raider DuroCross
2007-2009 Mitsubishi Raider LS
2008-2009 Pontiac G8 Base
2011-2012 Ram 1500 ST

Customer Reviews

Overall rating: 4.7 / 5 from 527 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕