📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 21
Air Lift

Air Lift LoadLifter 5000 Air Spring Kit for 2023 Ford F-350 DRW

SKU: ALF57380
$511.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

With up to 5,000 lbs. of load-leveling capacity, Air Lift’s LoadLifter 5000 kit makes towing and hauling with your 2023-2025 Ford F-350 DRW 4WD a comfortable and stress-free experience. For frequent use, our adjustable air springs are the perfect partner for your vehicle, eliminating any issues you face. The LoadLifter 5000 kit helps eliminate problems frequently faced when towing and hauling, such as squat, poor headlight aim, trailer sway, body roll, and bottoming out. With the added stability that air springs provide, you can haul safely, knowing you have optimal braking and steering control. With the ability to adjust the air pressure from 5-100 PSI, your vehicle can be ready for any weight and any situation. Each kit has upper and lower roll plates added to protect the air springs from sharp edges. The air springs are built like tires, reinforced with 2-ply fabric for maximum strength. All end caps are made with an ultra-high-strength nylon composite formula, as strong as steel but lighter and corrosion-proof. As the leader in air suspension products for over 75 years, Air Lift is committed to delivering quality load support products that fit, work, and last. To ensure quality, longevity, and customer satisfaction, key suspension components have all been torture-tested to 1 million cycles on our hydraulic test rig. With a limited lifetime warranty, a 60-day ride satisfaction guarantee, and a dedicated in-house customer service team, you can purchase this kit with peace of mind. Installing the kit requires slight modification to the existing vehicle, with moderate cutting required to install. The LoadLifter 5000 kit has easy-to-follow instructions and an underframe design that works with most in-bed hitches. Whether towing or hauling, the LoadLifter 5000 kit from Air Lift will allow you to use your F-350 with added safety and comfort.

Warranty
Warranty
Installation Instructions
  • Air springs fully adjustable from 5-100 PSI, helping to level your vehicle when towing or hauling a heavy load for a safe, comfortable ride
  • Up to 5,000 pounds of leveling capacity. Do not exceed vehicle's gross vehicle weight rating (GVWR)
  • Up To 5;000 Pounds Of Leveling Capacity. Do Not Exceed Vehicles Gross Vehicle Weight Rating (GVWR)
  • Air Springs Fully Adjustable From 5-100 PSI Helping To Level Your Vehicle When Towing
  • Rugged; Durable Components; Including Air Springs And All Hardware
  • Rugged, durable components, including air springs and all hardware
  • Underframe kit designed to work with most in-bed hitches
  • Easy to install with included instructions
  • Eliminate sag and bottoming out

This Part Fits:

Year Make Model Submodel
2020-2026 Ford F-350 Super Duty King Ranch
2020-2026 Ford F-350 Super Duty Lariat
2020-2024 Ford F-350 Super Duty Limited
2020-2026 Ford F-350 Super Duty Platinum
2020-2026 Ford F-350 Super Duty XL
2020-2026 Ford F-350 Super Duty XLT

Customer Reviews

Overall rating: 4.7 / 5 from 527 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕