📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 9
ARB

ARB Essentials Recovery Kit S2

SKU: ARBRK11A
$350.99
  • Make: Universal

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

The updated ARB Essentials Recovery Kit sports a new heavy-duty PVC outer shell and modernized colors. The 600gsm PVC outer provides a rugged exterior that is perfect for recovery situations because it makes cleaning easier and helps keep the bag and its contents from getting damp. Included in the kit is the highly regarded and awarded ARB 17,600lbs vehicle snatch strap. The ARB snatch strap which has been a winner of many recovery strap tests throughout Australia and the world, has a genuine 20% stretch to reduce shock to components on your vehicle and will assist in recovery situations. The ARB Essentials Recovery Kit also includes an ARB 19,800lbs Ultra Light Snatch Block, two type ?S galvanized 4.75t rated shackles, one set of cow grain leather palm with cow split leather back gloves, a 10ft ARB Recovery Tree Protector, and the updated 600gsm PVC recovery bag with multiple compartments highlighted in the ARB topographic styling. When selecting a vehicle recovery strap (snatch strap) it is recommended that the minimum breaking strength of the strap should be between two and three times the gross vehicle mass (GVM) of any vehicle it is used with, and that the strap must be suited to the GVM of the lighter of the two vehicles used in the recovery process. The 17,600lbs recovery strap is therefore suitable for vehicles with a GVM between 5800 and 8800 lbs, encompassing a majority of 4WD vehicles. This is only to be used as a general guide.

Warranty
  • Includes one 17,600lbs recovery strap made with reinforced eyes
  • The kit also contains a 19,800lbs Ultra Light snatch block
  • Contains two 4.75t Type S galvanized shackles 19mm (3/4 )
  • 600gsm recovery bag (updated color) is easy to keep clean
  • Bag features heavy duty buckles, comfortable carry handle
  • Bag features reflective strips for visibility
  • Multiple compartments keep gear in place
  • Kit includes a 10ft ARB tree protector
  • Kit includes one pair leather gloves
  • CE Certified

Customer Reviews

Overall rating: 4.7 / 5 from 527 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕