📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 7
Banks Power

Banks Power 05-07 Ford 6.0L F250-450 Techni-Cooler System

SKU: GBE25975
$1,497.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

Eliminates restrictions, dramatically increasing the cooling capacity for massive continuous power. Big aluminum end tanks won't burst like stock, with a thicker core for a 21% improvement in volume. Includes mandrel-bent 3.5 inch high-flow boost tubes and super-flow High-Ram intake manifold for maximum performance. Superior to Stock: Everything about Banks Techni-Cooler Intercooler System is designed bigger and better. This upgrade kit includes a set of 3.5 inch high-flow boost tubes and a Banks designed intercooler solution. The Banks Boost Tubes feature over sized mandrel-bent pipes matched to the increased performance design of the new intercooler. The Banks designed intercooler has a 19 percent thicker core with 21 percent greater volume to improve cooling. It also has large high-efficiency all-aluminum end tanks and wide-open inlet / outlets for a 69 percent greater flow area. Lastly to complete the kit, our Banks High-Ram Intake Elbow is also included. The Banks Techni-Cooler dramatically increases the engines cooling capacity and power potential by balancing a richer fuel mixture with cooler, denser, improved airflow. Result: You get higher continuous power and more power at any exhaust gas temp (EGT), with better fuel economy, and lower EGTs. That's a truckload of benefits! It doesn't get any cooler than Techni-Cooler! Mounting hardware included. Key Features: - High-efficiency custom-machined durable cast end tanks- Steady power output even under extreme temperatures- Improves Power, Durability and Fuel Economy- 3.5in Boost Tubes Reduces boost pressure loss- Packs cool dense air into the cylinders- Dramatically increases air density- 19% thicker core area vs stock- Includes High-Ram Intake Elbow- Includes all necessary hardware- Cooler EGTs and greater MPG- Lowers exhaust gas temps- 21% larger core volume- 2-year warranty

Installation Instructions
Owner's Manual
  • Improves Power, Durability & Fuel Economy
  • 2 Year Warranty

This Part Fits:

Year Make Model Submodel
2005 Ford Excursion Eddie Bauer
2005 Ford Excursion Limited
2005 Ford Excursion XLS
2005 Ford Excursion XLT
2005-2007 Ford F-250 Super Duty Harley-Davidson Edition
2005-2007 Ford F-250 Super Duty King Ranch
2005-2007 Ford F-250 Super Duty Lariat
2005-2007 Ford F-250 Super Duty XL
2005-2007 Ford F-250 Super Duty XLT
2005-2007 Ford F-350 Super Duty Harley-Davidson Edition
2005-2007 Ford F-350 Super Duty King Ranch
2005-2007 Ford F-350 Super Duty Lariat
2005-2007 Ford F-350 Super Duty XL
2005-2007 Ford F-350 Super Duty XLT

Customer Reviews

Overall rating: 4.7 / 5 from 527 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕