📱 Call Us

FSD26 IS LIVE: Every $1 spent = 150 entries to win a 2024 F-350 Limited + $20,000 cash.
1 6
BD Diesel

BD Diesel BRAKE Variable Vane Exhaust - Ford 2008-2010 6.4L

SKU: BDD2001100
$897.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us
134550 Entries150X
This purchase enters you to win the FSD26 truck: a 2024 F-350 Limited + $20,000 cash. Ends October 18. See the truck

The variable vane turbocharger design used in the 2004.5-up Duramax engines to reduce turbo lag and increase power can also help slow you down. BD utilizes this technology to electronically close off the vanes which can create up to 130 retarding horsepower. This braking force will help to maintain your speeds on descents and curves, giving you better control of your truck and load.While in Tow/Haul mode, switch BDs Variable Vane Brake (VVB) on and every time you let off the throttle, it will close the variable vanes in the turbo, developing exhaust back pressure in the engines combustion chamber which creates resistance against the piston from reaching top dead center.The VVB rotary switch offers three different modes included automatic moderate and aggressive downshifting programs for the Allison transmission to give better weight control. Exhaust braking also works in Allison manual shift selections. The VVB integrates with the cruise control to automatically accelerate and decelerate to maintain vehicle speed.Easily and simply installs by plugging into existing factory ports and by mounting the rotary switch on your dash. All of these features in one package which with some competitors would require two separate ones at nearly twice the price and twice as long to install. Now that is value added engine retarding at its engineered finest.

Installation Instructions
Installation Instructions
  • Integrated with the cruise control to automatically accelerate and decelerate to maintain vehicle speed
  • Different modes including automatic downshifting keeping engine rpm and engine retarding force high
  • Electronically closes off turbocharger vanes to provide engine braking
  • Electronically Closes Off Turbo Vanes To Provide Engine Braking
  • Integrated with CC To Auto Accel./Decelerate To Maintain Speed
  • Easily Installs By Plugging Into Existing Factory Ports
  • Helps Maintain Speeds On Descents And Curves
  • Delivers Up T0 70 PSI Exhaust Backpressure
  • Delivers up to 70psi exhaust backpressure
  • Can Create Up To 130 Retarding Horsepower
  • Different Modes Incl. Auto Downshifting
  • Better control of your truck and load.
  • Better Control Of Your Truck And Load
  • 12 Months r 24000 Mile Warranty
  • In-dash 'Push To Engage' Button
  • In-Dash Push To Engage Button

This Part Fits:

Year Make Model Submodel
2009-2010 Ford F-250 Super Duty Cabela's
2008-2009 Ford F-250 Super Duty FX4
2008-2010 Ford F-250 Super Duty Harley-Davidson Edition
2008-2010 Ford F-250 Super Duty King Ranch
2008-2010 Ford F-250 Super Duty Lariat
2008-2010 Ford F-250 Super Duty XL
2008-2010 Ford F-250 Super Duty XLT
2009-2010 Ford F-350 Super Duty Cabela's
2008-2009 Ford F-350 Super Duty FX4
2008-2010 Ford F-350 Super Duty Harley-Davidson Edition
2008-2010 Ford F-350 Super Duty King Ranch
2008-2010 Ford F-350 Super Duty Lariat
2008-2010 Ford F-350 Super Duty XL
2008-2010 Ford F-350 Super Duty XLT

Customer Reviews

Overall rating: 4.7 / 5 from 531 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕