📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
DFC

DFC 50-74 Buick INVICTA Rear /Rear-L Brake Wheel Cylinder

SKU: DFC375-47050
$14.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us
DFC 50-74 Buick INVICTA Rear /Rear-L Brake Wheel Cylinder

This Part Fits:

Year Make Model Submodel
1959-1962,1968-1970 Buick Electra 225
1968-1970 Buick Electra 225 Custom
1959-1967 Buick Electra Base
1966-1967 Buick Electra Custom
1959-1964,1970 Buick Estate Wagon Base
1960-1963 Buick Invicta Base
1960-1970 Buick LeSabre Base
1965-1970 Buick LeSabre Custom
1950-1958 Buick Special Base
1950-1958 Buick Super Base
1963-1969 Buick Wildcat Base
1965-1970 Buick Wildcat Custom
1965 Buick Wildcat Deluxe
1966 Buick Wildcat Gran Sport
1968-1974 Checker Aerobus Base
1955-1964 Chevrolet Bel Air Base
1955-1956 Chevrolet Bel Air Beauville
1955-1957 Chevrolet Bel Air Nomad
1958-1964 Chevrolet Biscayne Base
1960 Chevrolet Biscayne Fleetmaster
1969-1973 Chevrolet Blazer Base
1958-1961 Chevrolet Brookwood Base
1960-1967 Chevrolet C10 Panel Base
1960-1973 Chevrolet C10 Pickup Base
1967-1973 Chevrolet C10 Suburban Base
1960-1962 Chevrolet C20 Pickup Base
1955-1962 Chevrolet Corvette Base
1957-1958 Chevrolet Del Ray Base
1959-1960 Chevrolet El Camino Base
1971-1973 Chevrolet G10 Van Base
1971-1973 Chevrolet G10 Van Sportvan
1967-1973 Chevrolet G20 Van Base
1968-1973 Chevrolet G20 Van Sportvan
1972-1973 Chevrolet G30 Van Base
1972-1973 Chevrolet G30 Van Sportvan
1958-1964 Chevrolet Impala Base
1964 Chevrolet Impala SS
1960-1973 Chevrolet K10 Pickup Base
1967-1973 Chevrolet K10 Suburban Base
1958-1961 Chevrolet Nomad Base
1960-1967 Chevrolet P10 Series Base
1967-1973 Chevrolet P10 Van Base
1959-1961 Chevrolet Parkwood Base
1960-1966 Chevrolet Suburban Base
1955-1958 Chevrolet Truck 3100
1956-1958 Chevrolet Truck 3200
1958 Chevrolet Yeoman Base
1951-1954,1958-1959 GMC 100 Base
1966 GMC 1000 Base
1960-1965 GMC 1000 Series Base
1966 GMC 1500 Base
1960-1965 GMC 1500 Series Base
1967-1973 GMC C15/C1500 Pickup Base
1951-1952 GMC FC100 Base
1971 GMC G15/G1500 Van Base
1971-1973 GMC G15/G1500 Van Rally
1971-1973 GMC G15/G1500 Van Vandura
1967,1970-1972 GMC G25/G2500 Van Base
1968-1969,1971-1973 GMC G25/G2500 Van Rally
1968-1973 GMC G25/G2500 Van Vandura
1973 GMC G35/G3500 Van Rally
1973 GMC G35/G3500 Van Vandura
1970-1973 GMC Jimmy Base
1967-1973 GMC K15/K1500 Pickup Base
1967-1973 GMC K15/K1500 Suburban Base
1966 GMC P1000 Base
1967-1973 GMC P15/P1500 Van Base
1961-1966 GMC PB1000 Series Base
1963-1965 GMC PB1500 Series Base
1960-1966 GMC Suburban Base
1959-1969 Oldsmobile 98 Base
1963-1964 Oldsmobile 98 Custom
1959-1967 Oldsmobile 98 Holiday
1961 Oldsmobile Classic 98 Base
1967-1968 Oldsmobile Delmont 88 Base
1967 Oldsmobile Delmont 88 Holiday
1965-1969 Oldsmobile Delta 88 Base
1967-1969 Oldsmobile Delta 88 Custom
1965-1967 Oldsmobile Delta 88 Holiday
1969 Oldsmobile Delta 88 Royale
1961-1966 Oldsmobile Starfire Base
1959-1964 Oldsmobile Super 88 Base
1959-1964 Oldsmobile Super 88 Holiday

Customer Reviews

Overall rating: 4.7 / 5 from 527 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕