It's unbeatable Husky durability, custom fit to your vehicle, built for a lifetime of abuse. Its DuraGrip(TM) material stands up to harsh chemicals, while its UniEdge(TM) and center channel keep mud, snow and liquids contained, until you're ready to remove, wash and hit the road. Its StayPut Cleats(TM) keep it firmly anchored underfoot, and all Husky Heavy Duty floor mats mats are guaranteed for life. Found on the floors of the toughest trucks, vans and SUVs on earth.
UniEdge(TM) creates a wall around the center channel that funnels mud, snow and other liquids into the recessed ribs---containing the mess, until you can yank, dump, wash and repeat.
With the perfect balance of strength and softness, our rubberized DuraGrip(TM) material delivers no-slip, no-slide, driving confidence no matter what the road brings.
When we say it's "guaranteed for life" that is exactly what we mean. No hassles, no guff. If you have a problem, we'll replace it.
UniEdge[TM[ Creates A Wall Around The Center Channel That Funnels Mud/Snow And Other Liquids Into The Recessed Ribs
Our raised ridges help to keep your feet out of the mud, water, and dirt you just tracked in. You're welcome.
Our Raised Ridges Help To Keep Your Feet Out Of The Mud/Water And Dirt You Just Tracked In You Are Welcome
Our exclusive StayPut Cleats(TM) help keep your liner from shifting around underfoot like lesser liners.
With The Perfect Balance Of Strength And Softness/Our Rubberized Duragrip[TM] Material Delivers No-Slip
Our Exclusive Stayput Cleats[TM] Help Keep Your Liner From Shifting Around Underfoot Like Lesser Liners
The perimeter edge is raised to help keep all manner of mess contained, right where you want it.
The Perimeter EDGE Is Raised To Help Keep All Manner Of Mess Contained/Right Where You Want It
No Hassles/No Guff/If You Have A Problem With This Or Any Husky Product/We Will Replace It
Our Drivers Heel Pad is made extra thick for added protection from your lead foot.
Our Drivers Heel Pad Is Made Extra Thick For Added Protection From Your Lead Foot
Easily cleaned with patented Nibs on the reverse side to keep mat from shifting.
Easily Cleaned With Patented Nibs On The Reverse Side To Keep Mat From Shifting
When We Say Its Guaranteed For Life That Is Exactly What We Mean
Containing The Mess/Until You Can Yank/Dump/Wash And Repeat
No-slide/Driving Confidence No Matter What The Road Brings
Proudly made in the USA.
Proudly Made In The USA
This Part Fits:
Year
Make
Model
Submodel
1995-1999,2005
Chevrolet
Blazer
Base
1996-2004
Chevrolet
Blazer
LS
1995-2001
Chevrolet
Blazer
LT
1999-2001
Chevrolet
Blazer
Trailblazer
2001-2005
Chevrolet
Blazer
Xtreme
2003-2005
Chevrolet
Blazer
ZR2
1999-2005
Chevrolet
Cavalier
Base
1999-2005
Chevrolet
Cavalier
LS
2002-2005
Chevrolet
Cavalier
LS Sport
1999
Chevrolet
Cavalier
RS
1999-2002
Chevrolet
Cavalier
Z24
1991
Chevrolet
S10
Baja
1982-2003
Chevrolet
S10
Base
1982-1990
Chevrolet
S10
Durango
1992-1993
Chevrolet
S10
EL
1994-2004
Chevrolet
S10
LS
1982-1989
Chevrolet
S10
Sport
1994-1998
Chevrolet
S10
SS
1982-1992
Chevrolet
S10
Tahoe
1999-2003
Chevrolet
S10
Xtreme
1994-2003
Chevrolet
S10
ZR2
2002-2004
Chevrolet
S10
ZR5
1997-2004
Dodge
Dakota
Base
1998-2003
Dodge
Dakota
R/T
1997-2004
Dodge
Dakota
SLT
2004
Dodge
Dakota
SLT Plus
1997-2004
Dodge
Dakota
Sport
2004
Dodge
Dakota
Sport Plus
2002,2004
Dodge
Dakota
SXT
1998-2001
Dodge
Durango
Base
2000-2003
Dodge
Durango
R/T
1998-2003
Dodge
Durango
SLT
1999-2000,2002-2003
Dodge
Durango
SLT Plus
2000,2002-2003
Dodge
Durango
Sport
2003
Dodge
Durango
SXT
1991-2001
Ford
Explorer
Eddie Bauer
1995
Ford
Explorer
Expedition
1993-2001
Ford
Explorer
Limited
2000-2001
Ford
Explorer
Postal
1991-2000
Ford
Explorer
Sport
1991-1999
Ford
Explorer
XL
2000-2001
Ford
Explorer
XL Fleet
1999-2001
Ford
Explorer
XLS
1991-2001
Ford
Explorer
XLT
2001
Ford
Explorer Sport
Base
2005
Ford
Explorer Sport Trac
Adrenalin
2001
Ford
Explorer Sport Trac
Base
2002
Ford
Explorer Sport Trac
XL
2003-2005
Ford
Explorer Sport Trac
XLS
2003-2005
Ford
Explorer Sport Trac
XLT
2000-2004
Ford
Focus
LX
2007
Ford
Focus
S
2000-2004,2007
Ford
Focus
SE
2007
Ford
Focus
SES
2000
Ford
Focus
Sony Limited Edition
2007
Ford
Focus
ST
2002-2004
Ford
Focus
SVT
2000-2004
Ford
Focus
ZTS
2002-2004
Ford
Focus
ZTW
2000-2006
Ford
Focus
ZX3
2005-2006
Ford
Focus
ZX4
2005-2006
Ford
Focus
ZX4 ST
2002-2006
Ford
Focus
ZX5
2005-2006
Ford
Focus
ZXW
1994-2004
Ford
Mustang
Base
1987-2004
Ford
Mustang
GT
2001
Ford
Mustang
GT Bullitt
1995
Ford
Mustang
GTS
1987-1993
Ford
Mustang
LX
2003-2004
Ford
Mustang
Mach 1
1993-1999,2001,2003-2004
Ford
Mustang
SVT Cobra
2003
Ford
Mustang
SVT Cobra 10th Anniversary
1993,1995,2000
Ford
Mustang
SVT Cobra R
2001-2005
Ford
Ranger
Edge
1998-2002
Ford
Ranger
EV
2005-2009
Ford
Ranger
FX4
2002
Ford
Ranger
Postal
1993-1998
Ford
Ranger
Splash
1993,1997,2006-2009
Ford
Ranger
Sport
1993-1997,2005-2007
Ford
Ranger
STX
2004
Ford
Ranger
Tremor
1993-2009
Ford
Ranger
XL
1995
Ford
Ranger
XL Sport
1993-2009
Ford
Ranger
XLT
1995-1996
GMC
Jimmy
Base
2000-2001
GMC
Jimmy
Diamond Edition
1998-2000
GMC
Jimmy
Envoy
1995-1999,2001
GMC
Jimmy
SL
1995-2001
GMC
Jimmy
SLE
1995-2001
GMC
Jimmy
SLS
1995-2001
GMC
Jimmy
SLT
1982-1990
GMC
S15
Base
1987
GMC
S15
EL
1983,1986-1988
GMC
S15
Gypsy
1982-1990
GMC
S15
High Sierra
1982-1990
GMC
S15
Sierra Classic
1982
GMC
S15
Sierra Grande
1991-1993
GMC
Sonoma
Base
1992
GMC
Sonoma
GT
1994-2004
GMC
Sonoma
SL
1991-2001
GMC
Sonoma
SLE
1993-2004
GMC
Sonoma
SLS
1991
GMC
Syclone
Base
1996-2000
Isuzu
Hombre
S
1996-2000
Isuzu
Hombre
XS
1972-1976
Mazda
B1600
Base
1977-1978
Mazda
B1800
Base
1979-1981,1986-1987
Mazda
B2000
Base
1986-1987
Mazda
B2000
LX
1986-1987
Mazda
B2000
SE-5
1980-1981
Mazda
B2000
Sundowner
1982-1984
Mazda
B2000
Sundowner Base
1982-1983
Mazda
B2000
Sundowner DLX
1984
Mazda
B2000
Sundowner SE-5
1980-1984
Mazda
B2000
Sundowner Sport
1987-1993
Mazda
B2200
Base
1990-1993
Mazda
B2200
LE-5
1987-1989
Mazda
B2200
LX
1987-1993
Mazda
B2200
SE-5
1982-1984
Mazda
B2200
Sundowner Base
1982-1983
Mazda
B2200
Sundowner DLX
1994-1997,2002,2005-2008
Mazda
B2300
Base
1994-1997,2001,2003-2004
Mazda
B2300
SE
2001
Mazda
B2300
SX
1998-2001
Mazda
B2500
SE
1998-2001
Mazda
B2500
SX
1999
Mazda
B2500
Troy Lee
1994-1996,2002,2005-2007
Mazda
B3000
Base
2001-2007
Mazda
B3000
DS
1994-1996,1998-2001,2003-2004
Mazda
B3000
SE
1998,2000
Mazda
B3000
SX
1999-2000
Mazda
B3000
Troy Lee
1997,2002-2008
Mazda
B4000
Base
2001-2004
Mazda
B4000
DS
1994-1996
Mazda
B4000
LE
1994-2001,2003-2008
Mazda
B4000
SE
2000
Mazda
B4000
Troy Lee
1992-1994
Mazda
Navajo
DX
1991-1994
Mazda
Navajo
LX
1984
Mercury
Capri
RS
1967-1973,1977-1979,1981-1986,1999-2002
Mercury
Cougar
Base
1969-1970
Mercury
Cougar
Boss 302
1969-1970
Mercury
Cougar
Boss 429
1977
Mercury
Cougar
Brougham
1969-1970
Mercury
Cougar
Cobra Jet
1982
Mercury
Cougar
GS
1982-1992
Mercury
Cougar
LS
2001
Mercury
Cougar
S
1999-2002
Mercury
Cougar
V6
1977
Mercury
Cougar
Villager
1967-1982,1984-1997
Mercury
Cougar
XR-7
1997-2001
Mercury
Mountaineer
Base
2005-2009
Nissan
Xterra
Off-Road
2005-2009
Nissan
Xterra
S
2000-2009
Nissan
Xterra
SE
2006-2009
Nissan
Xterra
X
2000-2004
Nissan
Xterra
XE
1996-2001
Oldsmobile
Bravada
Base
2005
Pontiac
Sunfire
Base
1995-2003
Pontiac
Sunfire
GT
1995-2004
Pontiac
Sunfire
SE
Customer Reviews
Overall rating: 4.7 / 5 from 536 reviews.
First off super happy with the product from quality to fit. This was my first install and it was quite easy all the necessary hardware was there. I was looking for mid price head studs and I’ll say I love them I have a 100% and a s480 I’ve had no problems with it and I beat on it every day. 10/10 recommend.
put in the billet heat exchanger and when removing the old trans lines one of the lines bent when loosening nut. Great quality line fits perfectly way better than factory!
Fit perfectly in the stock location and is way bigger than stock and shipped fast. Would recommend full send diesel to anyone looking at these type of parts!
I had a few questions about the install. I called and left a message and then shortly there after my call was returned with the answers I needed. Appreciate the help.
The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.
It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit.
1. You have to be very careful about how the lines are run to prevent the hose from kinking.
2. There are no p clamps or hardware included to hold the lines in place.
To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.
It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock
AN line came apart on the hose barb with the clamping nut still tight within 2k miles. Almost nuked a brand new transmission before i could get it to the shoulder.
I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings
Awesome upper coolant pipe. Just what I wanted polished to go with my other parts. Great price and fast shipping. Also entries to possibly win a bad ass Cummins.
Great replacement transmission line kit for the 4th gen trucks. Other thing I added was heat sock around the lines running by the turbo and down pipe. Also got another transmission by pass block that has removable line adapters, so you can use the AN adapters.
I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.
Had a confusion on core for the value body. But once figured out the kit can in a week or less. Pretty easy install. Quality is super high and looks amazing.
I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.
Husky Liners 98-03 Dodge Durango/01-04 Chevy S-10 Pickup Heavy Duty Black Front Floor Mats
$101.99
Unit price /
Unavailable
It's unbeatable Husky durability, custom fit to your vehicle, built for a lifetime of abuse. Its DuraGrip(TM) material stands up to harsh chemicals, while its UniEdge(TM) and center channel keep mud, snow and liquids contained, until you're ready to remove, wash and hit the road. Its StayPut Cleats(TM) keep it firmly anchored underfoot, and all Husky Heavy Duty floor mats mats are guaranteed for life. Found on the floors of the toughest trucks, vans and SUVs on earth.
UniEdge(TM) creates a wall around the center channel that funnels mud, snow and other liquids into the recessed ribs---containing the mess, until you can yank, dump, wash and repeat.
With the perfect balance of strength and softness, our rubberized DuraGrip(TM) material delivers no-slip, no-slide, driving confidence no matter what the road brings.
When we say it's "guaranteed for life" that is exactly what we mean. No hassles, no guff. If you have a problem, we'll replace it.
UniEdge[TM[ Creates A Wall Around The Center Channel That Funnels Mud/Snow And Other Liquids Into The Recessed Ribs
Our raised ridges help to keep your feet out of the mud, water, and dirt you just tracked in. You're welcome.
Our Raised Ridges Help To Keep Your Feet Out Of The Mud/Water And Dirt You Just Tracked In You Are Welcome
Our exclusive StayPut Cleats(TM) help keep your liner from shifting around underfoot like lesser liners.
With The Perfect Balance Of Strength And Softness/Our Rubberized Duragrip[TM] Material Delivers No-Slip
Our Exclusive Stayput Cleats[TM] Help Keep Your Liner From Shifting Around Underfoot Like Lesser Liners
The perimeter edge is raised to help keep all manner of mess contained, right where you want it.
The Perimeter EDGE Is Raised To Help Keep All Manner Of Mess Contained/Right Where You Want It
No Hassles/No Guff/If You Have A Problem With This Or Any Husky Product/We Will Replace It
Our Drivers Heel Pad is made extra thick for added protection from your lead foot.
Our Drivers Heel Pad Is Made Extra Thick For Added Protection From Your Lead Foot
Easily cleaned with patented Nibs on the reverse side to keep mat from shifting.
Easily Cleaned With Patented Nibs On The Reverse Side To Keep Mat From Shifting
When We Say Its Guaranteed For Life That Is Exactly What We Mean
Containing The Mess/Until You Can Yank/Dump/Wash And Repeat
No-slide/Driving Confidence No Matter What The Road Brings