📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 7
ICON

ICON 2017+ Ford Raptor Front 3.0 Series Shocks VS RR CDCV Coilover Kit

SKU: ICO95002
$3,817.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

The front end geometry of the Gen 2 Raptor was found to be fairly similar to the previous model truck, however the shock mounting points had been moved higher up on the chassis. Seeing this as an opportunity, the team was able to design a 3.0 Series coilover that has more shaft travel while utilizing a barreled coil spring for more efficient packaging. The vehicle-specific valving featured in these shocks and the all new ICON-engineered spring work together to provide exceptional on-road ride quality with excellent off-road characteristics. ICON’s multi-stage hydraulic “Bump Zone” adds to the performance capability by providing an exponential increase in damping ability during the last 40% of compression travel for superior bottom-out resistance. In the ride zone, these 3.0 Series coilovers see a 50% increase in damping ability with the use of a significantly larger piston than what is found in the factory shocks. New 10” finned aluminum reservoirs provide a generous amount of shock oil while also providing an increase in surface area for enhanced cooling and consistent damping. The addition of ICON’s CDC Valve technology provides 10 settings of damping adjustment allowing the end-user to adjust the “feel” of the shocks for different terrains and vehicle cargo configurations. All of these features work together to deliver the perfect blend of on-road comfort and off-road performance.

Installation Instructions
Installation Instructions
  • Easy-to-adjust CDC Valve (Compression Damping Control) has 10 compression damping settings to suit all types of driving styles across varying terrain and vehicle cargo setups
  • 10" finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping
  • ICON’s multi-stage hydraulic “Bump Zone” exponentially increases bottom-out resistance in the last 40% of compression travel
  • Increased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use
  • “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
  • 50% increase in damping ability over OE shocks for excellent performance in extreme off-road conditions
  • High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage
  • Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life
  • Barreled coil spring design maximizes travel and provides more efficient packaging
  • Superior low speed control reduces body roll and increases on-road stability
  • FK Rod End COM12 spherical bearings ensure maximum strength and durability
  • Bolt-in design makes for an easy install into OEM shock location
  • CAD plated shock body with hard anodized piston and top cap
  • Adjustable coilovers yield 1-3” of front lift height
  • Heavy duty CNC machined 1” shock shafts

This Part Fits:

Year Make Model Submodel
2017-2021 Ford F-150 Raptor

Customer Reviews

Overall rating: 4.7 / 5 from 529 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕