📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 6
MBRP

MBRP 09-14 Dodge Ram 1500 5.7L Cat-Back Dual Split Rear (Through Stock Bumper) AL - Black

SKU: MBRPS5146BLK
$915.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

STYLE THAT'S WORTH A SECOND LOOK - ARMOR BLK Series exhaust systems crank your vehicle’s style dial to 11. The ARMOR BLK series offers the same performance as the other series with an engineered, high-heat black powder coating on the tailpipe(s) and tip(s).Manufactured using heavy-gauge Aluminized Steel tubing throughout the whole system, everything but the tailpipe and tip are left as mill-finish steel for better resistance of damage under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. The black powder coating features a 1-year warranty against factory defects, and the remaining parts feature an industry leading 3-year warranty. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

  • Black Coated. Fully Sealed Seams for Rust Resistance. Bolt-on Installation. MBRP Signature Styling and Sound. Factory Dual Replacement.
  • Stainless Steel Tips Are Included
  • Improved Torque And Horsepower
  • Lower Exhaust Gas Temperatures
  • 3 Year Warranty On The System
  • 1 Year Warranty On The Finish
  • Increased Throttle Response
  • Utilizes OEM Hangers
  • Mellow Exhaust Note
  • Bolt On Design

This Part Fits:

Year Make Model Submodel
2009-2010 Dodge Ram 1500 Laramie
2009-2010 Dodge Ram 1500 SLT
2009-2010 Dodge Ram 1500 Sport
2009-2010 Dodge Ram 1500 ST
2009-2010 Dodge Ram 1500 TRX
2009-2010 Dodge Ram 1500 TRX4
2011-2018 Ram 1500 Big Horn
2012-2018 Ram 1500 Express
2011-2018 Ram 1500 Laramie
2014-2015 Ram 1500 Laramie Limited
2011-2018 Ram 1500 Laramie Longhorn
2015-2018 Ram 1500 Limited
2014-2018 Ram 1500 Lone Star
2011-2016 Ram 1500 Outdoorsman
2013 Ram 1500 R/T
2015-2018 Ram 1500 Rebel
2011-2018 Ram 1500 SLT
2014-2018 Ram 1500 Special Service
2011-2018 Ram 1500 Sport
2011-2012 Ram 1500 ST
2011-2018 Ram 1500 Tradesman
2012 Ram 1500 Tradesman HD
2019 Ram 1500 Classic Big Horn
2019-2022 Ram 1500 Classic Express
2019 Ram 1500 Classic Lone Star
2019-2022 Ram 1500 Classic SLT
2019,2021-2023 Ram 1500 Classic Special Service
2019-2024 Ram 1500 Classic Tradesman
2019-2024 Ram 1500 Classic Warlock
2014-2022 Ram 2500 Big Horn
2014-2022 Ram 2500 Laramie
2014-2015 Ram 2500 Laramie Limited
2014-2021 Ram 2500 Laramie Longhorn
2016-2022 Ram 2500 Limited
2014-2015,2019-2022 Ram 2500 Lone Star
2014-2016 Ram 2500 Outdoorsman
2014-2022 Ram 2500 Power Wagon
2014-2018 Ram 2500 SLT
2014-2022 Ram 2500 Tradesman
2014-2022 Ram 3500 Big Horn
2014-2020,2022 Ram 3500 Laramie
2014-2020 Ram 3500 Laramie Longhorn
2016-2022 Ram 3500 Limited
2014-2015,2017,2019-2022 Ram 3500 Lone Star
2014-2018 Ram 3500 SLT
2014-2022 Ram 3500 Tradesman

Customer Reviews

Overall rating: 4.7 / 5 from 529 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕