📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 7
MBRP

MBRP 2019+ Chevrolet/GMC Silverado & Sierra 1500 3inch Cat Back Single Side Exit Aluminized Exhaust

SKU: MBRPS5087AL
$430.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

Upgrade your truck with the rugged value and performance of the MBRP S5087AL Cat-Back Exhaust System. This 3-inch, mandrel-bent system is designed to improve exhaust flow, delivering up to 27% increase over stock to better support your engine’s performance and efficiency.Constructed from heavy-gauge aluminized steel, the S5087AL offers solid durability at a more budget-friendly price point. It’s an ideal choice for drivers in dry, warm climates, providing dependable performance and longevity without compromising quality. Designed for a clean, hassle-free install, it utilizes OEM hanger locations for a precise fit and straightforward bolt-on installation.Finished with a sleek polished tip, this system enhances your truck’s appearance while producing a smooth, mild exhaust tone—perfect for daily driving and long hauls without unwanted drone.

  • Bolt-on installation. Up to 27 percent flow increase. Smooth mandrel bent tubing. Utilizes OEM hanger locations. Polished tip included. Enhanced exhaust tone, Tour Profile. Heavy-gauged aluminized steel.
  • Easy To Clean For Owners Who Operate In Severe Environments
  • Minimum Degree Mandrel Bends For Smoother Exhaust Flow
  • Designed To Maximize Exhaust Flow
  • Improved Torque And Horsepower
  • Lower Exhaust Gas Temperatures
  • Increased Throttle Response
  • Durable Steel Construction
  • Bolt On - No Weld Design
  • Utilizes OEM Hangers

This Part Fits:

Year Make Model Submodel
2019-2021 Chevrolet Silverado 1500 Custom
2019-2025 Chevrolet Silverado 1500 Custom Trail Boss
2019-2024 Chevrolet Silverado 1500 High Country
2019-2026 Chevrolet Silverado 1500 LT
2019-2025 Chevrolet Silverado 1500 LT Trail Boss
2019-2026 Chevrolet Silverado 1500 LTZ
2023-2024 Chevrolet Silverado 1500 PPV
2019-2026 Chevrolet Silverado 1500 RST
2019-2021 Chevrolet Silverado 1500 SSV
2019-2026 Chevrolet Silverado 1500 WT
2022 Chevrolet Silverado 1500 LTD High Country
2022 Chevrolet Silverado 1500 LTD LT
2022 Chevrolet Silverado 1500 LTD LT Trail Boss
2022 Chevrolet Silverado 1500 LTD LTZ
2022 Chevrolet Silverado 1500 LTD RST
2022 Chevrolet Silverado 1500 LTD SSV
2022 Chevrolet Silverado 1500 LTD WT
2019,2021-2022 Chevrolet Suburban LT
2019-2022 Chevrolet Tahoe LT
2019-2022 Chevrolet Tahoe SSV
2019-2021 GMC Savana 2500 Base
2019-2021 GMC Savana 3500 Base
2019-2021 GMC Sierra 1500 AT4
2019-2021 GMC Sierra 1500 Base
2019-2024,2026 GMC Sierra 1500 Denali
2019-2026 GMC Sierra 1500 Elevation
2022-2026 GMC Sierra 1500 Pro
2019-2026 GMC Sierra 1500 SLE
2019-2026 GMC Sierra 1500 SLT
2022 GMC Sierra 1500 Limited Denali
2022 GMC Sierra 1500 Limited Elevation
2022 GMC Sierra 1500 Limited Pro
2022 GMC Sierra 1500 Limited SLE
2022 GMC Sierra 1500 Limited SLT
2019-2022 GMC Yukon SLE
2019-2022 GMC Yukon SLT
2019-2022 GMC Yukon XL SLE
2019-2022 GMC Yukon XL SLT

Customer Reviews

Overall rating: 4.7 / 5 from 529 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕