📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 5
Mishimoto

Mishimoto 11-19 Ford 6.7L Powerstroke Performance Oil Cooler Kit - Black

SKU: MISMMOC-F2D-11KBK
$1,267.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

Oil is the lifeblood of an engine, and in a hardworking diesel engine like the 2011-2019 6.7L Powerstroke, keeping that oil cool is essential to the engine's health and running.The stock 2011-2019 Powerstroke liquid-to-liquid oil cooler uses engine coolant to draw heat away from the oil and vent it through the engine radiator. It's a stout design that typically performs well for daily driven trucks. However, after almost 10 years of service, many of those stock coolers have seen better days. Even in good condition, the stock 6.7L oil cooler can struggle to keep up with heavy towing or modified engines. That's why Mishimoto has developed this performance oil cooler for the 2011-2019 Ford 6.7L Powerstroke.This performance oil cooler kit eliminates the factory liquid-to-liquid cooler and replaces it with a front-mounted liquid-to-air cooler. By eliminating the liquid-to-liquid cooler, this kit takes stress off the primary cooling system, lowering your coolant temps making the oil cooling system more efficient. Our massive cooler measures 17.4" long, 7.5" tall, and over 2.5" thick to give your Powerstroke the cooling capability to handle any job. Oil is fed into the cooler via two stainless-steel braided -16 AN lines for adequate flow in even the most demanding situations. The bar-and-plate design and stainless-steel lines allow this kit to withstand road debris and the elements year-round. This kit also includes a CNC-machined aluminum adapter plate that bolts directly to the engine in the stock cooler location and brackets to support the lines and make installation a breeze.This 2011-2019 Ford 6.7L Performance Oil Cooler Kit is available in sleek silver or stealthy black, and like all Mishimoto 6.7L Powerstroke products, it's backed by our Mishimoto Lifetime Warranty for a lifetime of worry-free driving.

  • Bar-and-plate cooler design for effective cooling and durability against road debris
  • Replaces stock liquid-to-liquid cooler to reduce both coolant and oil temps
  • Fits 2011-2019 Ford 6.7L Powerstroke

This Part Fits:

Year Make Model Submodel
2011-2019 Ford F-250 Super Duty King Ranch
2011-2019 Ford F-250 Super Duty Lariat
2018-2019 Ford F-250 Super Duty Limited
2013-2019 Ford F-250 Super Duty Platinum
2011-2019 Ford F-250 Super Duty XL
2011-2019 Ford F-250 Super Duty XLT
2011-2019 Ford F-350 Super Duty King Ranch
2011-2019 Ford F-350 Super Duty Lariat
2018-2019 Ford F-350 Super Duty Limited
2013-2019 Ford F-350 Super Duty Platinum
2011-2019 Ford F-350 Super Duty XL
2011-2019 Ford F-350 Super Duty XLT

Customer Reviews

Overall rating: 4.7 / 5 from 529 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕