📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 7
Mishimoto

Mishimoto 16-20 Jeep Grand Cherokee Thermal Bypass Valve Kit FF

SKU: MISMMTC-WK2-TBVFF
$105.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

The transmission is the backbone of your Grand Cherokee. It's responsible for transmitting large quantities of torque from your V8 or 3.0L EcoDiesel powerplant. That much torque generates a lot of heat, and if that heat isn't dissipated, it can destroy your transmission. The transmission cooler does a good job of keeping trans fluid temperatures in check, but only if the fluid can reach it. The stock cooling system of the 8HP transmission utilizes an in-line thermal bypass valve that controls fluid flow to the transmission cooler. The purpose of this valve is to prevent transmission fluid from flowing to the cooler until it reaches operating temperature. The thermostat inside this valve is prone to failure, however, and when that happens, the fluid never flows to the cooler, and the transmission can overheat. That's why Mishimoto has developed a full-flow thermal bypass valve upgrade for your 2016-2020 Jeep Grand Cherokee. The Mishimoto thermal bypass valve kit includes an all-aluminum CNC-machined housing that replaces the stock unit. This full-flow valve allows fluid to pump through the cooler as soon as the vehicle is started, eliminating the potential failure point of the stock bypass and providing cooling benefits. The full-flow design is beneficial to vehicles operating in hot climates, extreme driving conditions, or towing heavy loads. As with Mishimoto products, this Full-Flow Transmission Thermal Bypass Valve Kit includes our signature Lifetime Warranty.

  • Durable CNC-machined billet aluminum construction
  • Eliminates failure-prone bypass valve
  • Installs in less than 1 hour

This Part Fits:

Year Make Model Submodel
2018-2020 Dodge Durango Citadel
2018 Dodge Durango GT
2019-2020 Dodge Durango Pursuit
2018-2020 Dodge Durango R/T
2018-2020 Dodge Durango Special Service
2018-2021 Dodge Durango SRT
2022-2024 Dodge Durango SRT 392
2023-2024 Dodge Durango SRT 392 Plus
2023-2024 Dodge Durango SRT 392 Premium
2018 Dodge Durango SXT
2016 Jeep Grand Cherokee 75th Anniversary
2021 Jeep Grand Cherokee 80th Anniversary
2018-2020 Jeep Grand Cherokee Altitude
2018-2021 Jeep Grand Cherokee High Altitude
2016-2020 Jeep Grand Cherokee Laredo
2021 Jeep Grand Cherokee Laredo E
2021 Jeep Grand Cherokee Laredo X
2016-2020 Jeep Grand Cherokee Limited
2019-2021 Jeep Grand Cherokee Limited X
2016-2020 Jeep Grand Cherokee Overland
2016-2020 Jeep Grand Cherokee SRT
2016-2020 Jeep Grand Cherokee Summit
2018-2021 Jeep Grand Cherokee Trackhawk
2017-2020 Jeep Grand Cherokee Trailhawk
2019-2020 Jeep Grand Cherokee Upland
2021 Jeep Grand Cherokee L Altitude
2021 Jeep Grand Cherokee L Laredo
2021 Jeep Grand Cherokee L Limited
2021 Jeep Grand Cherokee L Overland
2021 Jeep Grand Cherokee L Summit
2021 Jeep Grand Cherokee L Summit Reserve

Customer Reviews

Overall rating: 4.7 / 5 from 529 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕