📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 6
Mishimoto

Mishimoto 2018+ Jeep Wrangler JL 2.0L Baffled Oil Catch Can Kit - Black

SKU: MISMMBCC-JLH-18CBE
$266.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

The direct-injected and turbocharged 2.0L Hurricane engine found in the 2018-2023 Jeep Wrangler JL is the most advanced engine ever fitted to a Wrangler. But, despite all the high-tech features that make the Hurricane great, It's still vulnerable to a very low-tech problem: blow-by. The fuel efficiency and increased power of direct injection comes with the threat of carbon buildup. As fuel and air get squeezed in the cylinder, some of the mixture leaks past the piston rings and carries oil from the cylinder walls with it. This mixture is known as blow-by. To prevent crankcase pressure from building up, the blow-by is then vented into the intake to be reburned. Blow-by becomes an issue with direct-injected engines when it passes the intake valves. Without fuel spraying over the valve, There's nothing to wash off the blow-by and heat from combustion eventually causes it to build up as carbon on the back of the intake valves. That carbon buildup prevents valves from closing fully and disrupts airflow. The result is poor running, misfires and, if left long enough, engine damage. The best solution to the problem of blow-by buildup is prevention. Instead of letting blow-by enter the intake, the Mishimoto 2018-2023 Jeep Wrangler JL 2.0L direct-fit baffled oil catch can kit diverts it away from the intake valves and into a 7.5 oz catch can. You can then recycle the contents of the catch can with your next oil change. The internal air diverters and baffle of our catch can thoroughly condense oil, fuel, and water vapor so that the only air flowing through your intake is fresh air. In addition, our direct-fit lines and high-flow filter ensure CEL-free running. Like all Mishimoto products, this 2018-2023 Jeep Wrangler JL 2.0L catch can kit is protected by our Mishimoto Lifetime Warranty, so your JL can also be protected from blow-by for a lifetime.

  • Durable 3mm thick steel bracket mounts the catch can securely while maintaining short hose runs
  • Accommodates factory pressure sensor for CEL-free running
  • Installs in under 1 hour

This Part Fits:

Year Make Model Submodel
2021 Jeep Wrangler 80th Anniversary
2021,2023 Jeep Wrangler Freedom
2023 Jeep Wrangler High Altitude
2021 Jeep Wrangler Islander
2018-2023 Jeep Wrangler Rubicon
2023 Jeep Wrangler Sahara
2023 Jeep Wrangler Sahara 4xe
2018-2023 Jeep Wrangler Sport
2018-2023 Jeep Wrangler Sport S
2021 Jeep Wrangler Unlimited 80th Anniversary
2021 Jeep Wrangler Unlimited Freedom
2021-2022 Jeep Wrangler Unlimited High Altitude
2021-2022 Jeep Wrangler Unlimited High Altitude 4xe
2021 Jeep Wrangler Unlimited Islander
2018-2022 Jeep Wrangler Unlimited Rubicon
2021-2022 Jeep Wrangler Unlimited Rubicon 4xe
2018-2021 Jeep Wrangler Unlimited Sahara
2021-2022 Jeep Wrangler Unlimited Sahara 4xe
2021-2022 Jeep Wrangler Unlimited Sahara Altitude
2018-2022 Jeep Wrangler Unlimited Sport
2021-2022 Jeep Wrangler Unlimited Sport Altitude
2018-2022 Jeep Wrangler Unlimited Sport S
2021-2022 Jeep Wrangler Unlimited Willys
2021-2022 Jeep Wrangler Unlimited Willys Sport
2021-2023 Jeep Wrangler Willys
2023 Jeep Wrangler Willys 4xe
2021-2023 Jeep Wrangler Willys Sport

Customer Reviews

Overall rating: 4.7 / 5 from 529 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕