📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 5
Mishimoto

Mishimoto 2020+ Toyota Supra Charge Pipe Kit - Red

SKU: MISMMICP-SUP-20RD
$369.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

Whether your 2020+ Toyota GR Supra is bone stock or sending massive power to the pavement via an upgraded turbo, your B58 needs to breathe. The stock plastic charge pipe fitted between the turbocharger and the intake manifold is adequate for daily driving, but the GR Supra was built for more than just the daily commute and hauling groceries. If you want to get the most performance out of your Supra, it's time to ditch the restrictive plastic charge pipe and upgrade to Mishimoto's performance aluminum charge pipe.This Mishimoto performance aluminum charge pipe for the 2020+ Toyota GR Supra replaces your stock fragile plastic charge pipe with a free-flowing, 3in aluminum version that's guaranteed to last the lifetime of your Supra. Our design removes the kinks and pinched sections of the stock pipe in favor of smooth flowing curves. We've also designed our couplers and flanges to transition seamlessly from one component to the next. All of this adds up to a charge pipe that outflows stock by up to 42-percent.Our performance charge pipe is constructed from two mandrel-bent aluminum pipes with CNC-machined flanges for ease of installation, maximized durability, and perfect fitment. Two pre-installed bungs can be drilled and tapped for boost pressure sensors or methanol injection. The included coupler is made from five layers of silicone with embedded heat-resistant fibers and are reinforced with steel wire to prevent ballooning under high boost pressures. This charge pipe kit is a direct fit with no other modifications required and includes constant-tension worm gear clamps for reliable performance. Like all Mishimoto GR Supra products, this is backed by our lifetime warranty for a lifetime of performance.

  • 3-in mandrel-bent piping with internal transitions for reduced turbulence and improved flow
  • Precision CNC-machined adapters for smooth flow and secure fit
  • Reduces restriction by up to 42-percent over stock pipe

This Part Fits:

Year Make Model Submodel
2020 BMW 540i Base
2020-2025 BMW 540i xDrive Base
2020-2022 BMW 740i Base
2020-2022 BMW 740i xDrive Base
2020-2022 BMW 745e xDrive Base
2020-2025 BMW 840i Base
2020-2025 BMW 840i Gran Coupe Base
2020-2025 BMW 840i xDrive Base
2020-2025 BMW 840i xDrive Gran Coupe Base
2020-2021 BMW M340i Base
2020-2025 BMW M340i xDrive Base
2020-2024 BMW X3 M
2020-2022 BMW X3 M Competition
2020-2024 BMW X3 M40i
2025 BMW X3 M50 xDrive
2020-2024 BMW X3 sDrive30i
2025 BMW X3 xDrive30
2020-2021 BMW X3 xDrive30e
2020-2024 BMW X3 xDrive30i
2020-2025 BMW X4 M
2020-2022 BMW X4 M Competition
2020-2025 BMW X4 M40i
2020-2025 BMW X4 xDrive30i
2020-2023 BMW X6 M
2020-2021 BMW X6 M Competition
2020-2023 BMW X6 M50i
2024-2025 BMW X6 M60i
2020-2021 BMW X6 sDrive40i
2020-2023 BMW X6 xDrive40i
2022 BMW Z4 M40i
2020 BMW Z4 M40i First Edition
2020-2021 BMW Z4 sDrive M40i
2019-2022 BMW Z4 sDrive30i
2024 Toyota GR Supra 45th Anniversary Edition
2021-2022 Toyota GR Supra A91 Edition
2023 Toyota GR Supra A91-MT Edition
2020-2022 Toyota GR Supra Base
2020 Toyota GR Supra Launch Edition
2020-2022 Toyota GR Supra Premium

Customer Reviews

Overall rating: 4.7 / 5 from 529 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕