📱 Call Us

FSD26 IS LIVE: Every $1 spent = 150 entries to win a 2024 F-350 Limited + $20,000 cash.
1 6
Mishimoto

Mishimoto Wheel Spacers - 5x139.7 - 77.8CB - 25 - 9/16 - Black

SKU: MISBNWS-017-250BK
$168.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us
25200 Entries150X
This purchase enters you to win the FSD26 truck: a 2024 F-350 Limited + $20,000 cash. Ends October 18. See the truck

Running aftermarket wheels and bigger tires on a lifted Ram 1500 means dealing with clearance the factory never planned for - wide meats rubbing calipers, backspacing that doesn’t work with a lift, and a stance that sits tucked instead of flush. Mishimoto Wheel Spacers add the outward offset that puts the wheel where the build needs it, without the failure modes that cheap cast spacers bring to a full-size truck platform.--Forged 6061-T6 aluminum construction resists the impact, side-loading, and flex cycling that crack cast spacers under off-road and daily truck use. A hub-centric 77.8mm centering bore mates to the factory hub so wheel load transfers through the hub instead of riding on the studs - the same way the factory designed it, eliminating the vibration and wheel walk that lug-centric spacers introduce. Grade-12.9 steel studs and lug nuts in 9/16-18 thread exceed OEM stud strength, adding clearance without trading away clamping force. A durable anodized finish seals against the salt, mud, and moisture that pit and seize unsealed aluminum after seasons of truck use.--Sized for the factory 5x139.7 bolt pattern, 77.8mm hub bore, and 9/16-18 thread, the spacers bolt on to the 2002-2011 Dodge Ram 1500 with no cutting, hub modification, or adapter work. Backed by the Mishimoto Lifetime Warranty.

Installation Instructions
  • Hub-centric, not lug-centric - 77.8mm centering bore mates to the factory hub so wheel load transfers through the hub instead of riding on the studs, eliminating the vibration and wheel walk lug-centric spacers introduce on full-size trucks
  • Push wheels out for stance and clearance - adds outward offset so aftermarket wheels and wider tires clear the Ram’s brake calipers and suspension components without contact under full droop or bump.
  • Forged 6061-T6 aluminum holds up to truck abuse - forged construction resists the impact, side-loading, and flex cycling that crack cast spacers under off-road and heavy-use truck conditions.

This Part Fits:

Year Make Model Submodel
2009-2010 Dodge Dakota Big Horn
2005-2010 Dodge Dakota Laramie
2009-2010 Dodge Dakota Lone Star
2005-2008 Dodge Dakota SLT
2005,2008 Dodge Dakota Sport
2005-2010 Dodge Dakota ST
2008 Dodge Dakota SXT
2008 Dodge Dakota TRX
2008-2010 Dodge Dakota TRX4
2006-2008 Dodge Durango Adventurer
2004-2009 Dodge Durango Limited
2009 Dodge Durango Limited Hybrid
2009 Dodge Durango SE
2004-2009 Dodge Durango SLT
2004-2005 Dodge Durango ST
2005-2008 Dodge Durango SXT
2003-2008 Dodge Ram 1500 Laramie
2002-2008 Dodge Ram 1500 SLT
2006-2007 Dodge Ram 1500 Sport
2004-2006 Dodge Ram 1500 SRT-10
2002-2008 Dodge Ram 1500 ST
2008 Dodge Ram 1500 SXT
2006-2007 Dodge Ram 1500 TRX4

Customer Reviews

Overall rating: 4.7 / 5 from 544 reviews.

Customer photo review of FSD 1998.5- Present 24V Cummins Clamp Lock Head Stud Kit

First off super happy with the product from quality to fit. This was my first install and it was quite easy all the necessary hardware was there. I was looking for mid price head studs and I’ll say I love them I have a 100% and a s480 I’ve had no problems with it and I beat on it every day. 10/10 recommend.

Jacob O. 5/5 Verified

FSD 1998.5- Present 24V Cummins Clamp Lock Head Stud Kit

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕