📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 5
PowerStop

Power Stop 90-01 Jeep Cherokee Front Red Calipers w/o Brackets - Pair

SKU: PSBS4339
$210.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

PowerStop Powder Coated Brake Calipers are made specifically with the enthusiast in mind. These calipers (sold as pairs) bolt directly in place of the original stock calipers and look great behind any set of wheels. PowerStop Brake Calipers are engineered to provide the best performance and reliability, and are coated with a durable electrostatic high-temperature red powder coat. The easy-to-clean coating provides resistance to rust and corrosion thus extending the life of your calipers. PowerStop calipers are 100% pressure tested and inspected to verify piston operation to guarantee a reliable, high quality brake performance. Expertly assembled with everything needed for a brake upgrade using new seals, caliper slide pins/bolts, dust boots, bleeder screws, and stainless-steel pad attachment hardware. High temperature EPDM rubber dust boots and premium lubricants ensure a smooth caliper operation and durability in the harshest conditions. PowerStop Powder Coated Brake Calipers are finished in a high-temp powder coating and designed to enhance both the performance and custom look of your vehicle!

  • New seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad attachment hardware and mounting brackets.
  • Premium lubricant is used to ensure a smooth caliper operation and durability in the harshest conditions.
  • Easy to clean powder coating helps to resist rust and corrosion and extends the life of calipers.
  • 100% Pressure tested and inspected for high quality brake performance.
  • High-Temp red powder coating keeps calipers looking new longer
  • Bolt on ready, no modifications necessary
  • High-Temp EPDM rubber dust boots

This Part Fits:

Year Make Model Submodel
1990-1993 Jeep Cherokee Base
1991-1992 Jeep Cherokee Briarwood
1996,1998-2001 Jeep Cherokee Classic
1993-1997 Jeep Cherokee Country
1990-1992 Jeep Cherokee Laredo
1990-1992,1998-2001 Jeep Cherokee Limited
1990 Jeep Cherokee Pioneer
1994-2001 Jeep Cherokee SE
1990-2001 Jeep Cherokee Sport
1990-1992 Jeep Comanche Base
1990-1992 Jeep Comanche Eliminator
1990-1992 Jeep Comanche Pioneer
1998 Jeep Grand Cherokee 5.9 Limited
1993 Jeep Grand Cherokee Base
1993-1998 Jeep Grand Cherokee Laredo
1993-1998 Jeep Grand Cherokee Limited
1995,1997 Jeep Grand Cherokee Orvis
1994-1995 Jeep Grand Cherokee SE
1997-1998 Jeep Grand Cherokee TSi
1993 Jeep Grand Wagoneer Base
1990 Jeep Wagoneer Limited
2006 Jeep Wrangler 65th Anniversary Edition
1990-1993 Jeep Wrangler Base
1990-1992 Jeep Wrangler Islander
1990 Jeep Wrangler Laredo
1991-1994 Jeep Wrangler Renegade
1995 Jeep Wrangler Rio Grande
2003-2006 Jeep Wrangler Rubicon
1991-1994 Jeep Wrangler S
1990-1995,1997-2004 Jeep Wrangler Sahara
1994-1995,1997-2006 Jeep Wrangler SE
1997-2006 Jeep Wrangler Sport
2004-2006 Jeep Wrangler Unlimited
2005-2006 Jeep Wrangler Unlimited Rubicon
2002-2006 Jeep Wrangler X

Customer Reviews

Overall rating: 4.7 / 5 from 527 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕