📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 9
aFe

aFe POWER Dynamic Air Scoop D.A.S Snorkel for 20-26 Jeep Gladiator Mojave V6-3.5L

SKU: AFE55-21005
$626.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

The Jeep Gladiator Mojave is unlike any other Gladiator—it’s Jeep’s first Desert Rated™ vehicle, engineered specifically for high-speed off-road performance in extreme heat, dust, and sand. To match that mission, aFe POWER developed a dedicated D.A.S. Snorkel designed exclusively for the Mojave, featuring a taller, model-specific riser that perfectly follows the Mojave’s unique hood profile. The forward-facing Dynamic Air Scoop (D.A.S.) inlet is positioned to deliver a steady supply of cooler, cleaner air while helping reduce dust ingestion during high-speed desert driving. Whether you’re blasting across open terrain or crawling through deep silt beds, the aFe POWER D.A.S. Snorkel helps protect your Jeep Gladiator Mojave’s engine from heat, debris, and airborne contaminants. Desert environments punish intake systems with heat soak, fine dust, and sustained high-RPM operation. The aFe POWER Mojave D.A.S. Snorkel is designed to thrive in those conditions—helping your engine breathe cleaner air while maintaining the rugged durability expected from a Desert Rated™ platform. Designed to complement the Mojave’s unique factory styling, this snorkel features a Mojave-specific orange aluminum bezel that matches the OEM orange accents found throughout the vehicle. The precision-fit design follows the Mojave’s hood and cowl contours for a factory-integrated appearance—because purpose-built performance should look the part. The Mojave snorkel installs using a no-cut, no-drill cowl pass-through design, preserving the integrity of the factory body panels. Installation is fully reversible, allowing the vehicle to be returned to stock if needed. A removable runner section allows quick access to critical under-hood components like the battery and fuse box. The integrated drain plug lets you manage moisture inside the inlet, helping maintain consistent airflow and long-term performance.

Installation Instructions
  • Orange aluminum bezel, designed to match the signature factory orange accents found on every Jeep Gladiator Mojave
  • Model-specific riser designed to match the Gladiator Mojave’s taller factory hood height
  • Premium materials engineered for extreme heat, UV exposure, and harsh environments
  • No-cut, no-drill cowl pass-through integrates cleanly with the factory airbox
  • Removable runner section provides quick access to the battery and fuse box
  • Forward-facing D.A.S. inlet optimized for airflow at speed
  • Fully sealable system for water crossings when required

This Part Fits:

Year Make Model Submodel
2020-2026 Jeep Gladiator Mojave

Customer Reviews

Overall rating: 4.7 / 5 from 529 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕