📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 3
Air Lift

Air Lift 1000 Universal Air Spring Kit

SKU: ALF60902
$148.99
  • Make: Universal

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

With the ability to fit almost any open coil spring, the Air Lift 1000 Universal kits from Air Lift are our most versatile kits. These kits provide your vehicle with up to 1000 lbs. of load-leveling support, making your ride smooth and comfortable. Air Lift 1000 Universal air springs can improve all aspects of your ride, helping to eliminate squat, poor headlight aim, and soak up bumps, creating a smoother ride. Your coil-sprung vehicle will drive smoothly and haul better than ever before with these kits installed. Finding the right kit for your vehicle is simple and as easy as 1-2-3! First, unload your vehicle and allow it to return to normal ride height. Then, measure the available inside height and available inside diameter of the vehicle's coil springs, finding the available height and width inside the springs. Finally, check out the chart provided by Air Lift (https://www.airliftcompany.com/workshop/air-lift-1000-universal-air-spring-kit/) and match your measurements with the corresponding kit numbers! Each Air Lift 1000 Universal Air Spring kit comes fully equipped with every part needed for a full installation. This includes two Air Lift 1000 air springs, made from durable, molded polyurethane, and two heat shields (if applicable), with clamps. The kit also contains air line, tee, zip ties, two Schrader values, air spring spacers (if applicable), and, of course, detailed installation guides with advice for proper installation. All of our kits also come with Air Lift's 60-day money-back guarantee. As the leader in air suspension products for over 70 years, Air Lift is committed to delivering quality parts that last. To ensure the highest quality, longevity, and customer satisfaction, the key components and air springs have all been rigorously tested. With a limited lifetime, unlimited-mileage warranty -- not to mention the Air Lift reputation for great customer service and technical support -- you can purchase this kit with peace of mind.

Owner's Manual
Warranty
Technical Bulletin
Installation Instructions
  • Up to 1,000 lbs. of load-leveling capacity (Note: Do not exceed vehicle's GVWR)
  • Up To 1;000 Lbs. Of Load-Leveling Capacity (Note: Do Not Exceed Vehicles GVWR)
  • Rugged durable components including air springs and all hardware
  • Installs Inside Coil Spring To Eliminate Sag And Bottoming Out
  • Easy to install with fully-illustrated installation manual
  • Requires only two measurements to determine kit
  • 3.00" Min. Diameter and 9.00 Max. Length
  • 3.00 Min. Diameter And 9.00 Max. Length
  • Limited Lifetime Warranty
  • Tough Molded Polyurethane

Customer Reviews

Overall rating: 4.7 / 5 from 525 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

Customer photo review of XDP Wrinkle Black HD High Output Alternator 1999-2003 Ford 7.3L Powerstroke XD356

Had this thing for just over a month now. My 7.3 had the small housing alternator from factory so I needed to use the spacers. Using the spacers makes the belt slightly harder to get back on so I would recommend going up 1/2" on the belt size. Otherwise I have no issue, powers the truck just fine for the last 1000 miles.

Gunther B. 4/5 Verified

XDP Wrinkle Black HD High Output Alternator 1999-2003 Ford 7.3L Powerstroke XD356

⌕