📱 Call Us

FSD26 IS LIVE: Every $1 spent = 150 entries to win a 2024 F-350 Limited + $20,000 cash.
1 10
ARB

ARB Soft Connect Shackle 14.5T Soft Shackle Orange 14.5T

SKU: ARBARB2018
$68.99
  • Make: Universal

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us
10200 Entries150X
This purchase enters you to win the FSD26 truck: a 2024 F-350 Limited + $20,000 cash. Ends October 18. See the truck

Staying safe is paramount in recovery situations, and having properly rated gear is key. The ARB Soft Connect Shackle has been updated with UHMWPE (Ultra High Molecule Weight Polyethylene) high tensile, CE certified, synthetic rope. UHMWPE rope is used in many of the synthetic rope applications on winches and purpose-built tow straps. Rated at 14.5T breaking strength, the ARB Soft Connect Shackle is engineered to float in water, be resistant to short-term UV radiation, and provide superior strength. Updating the protection to the UHMWPE rope in the ARB soft shackle, the UHMWPE synthetic rope is encased in a high tensile, braided shield. The braided shield improves abrasion resistance to protect the UHMWPE synthetic rope and further protect against cuts and abrasions when in use. The larger soft shackle connection is formed by passing the large ball end knot through the open loop, the loop then tightens around the knot when used and pulls securely against the large formed knot during recovery. The knot cannot let go and loop tightens securely around the knot forming the connection. The ARB Soft Connect Shackle is suitable for vehicles up to 3.5T GVM and has a breaking strain of 14.5T. The ARB Soft Connect Shackle acts as a fuse in a recovery situation, breaking generally before any rated metal components that it is attached to should break. This removes flying metal projectiles in recovery situations and provides a safer recovery for persons involved in the recovery and bystanders. The Soft Connect Shackle also provides flexibility for attaching your strap to a rated recovery point. Always follow correct recovery procedures and put safety for you and everyone else first before attempting any recovery. Protecting and storing your ARB Soft Connect Shackle when not in use is done with the included drawstring carry bag. The bag incorporates a mesh and nylon case to allow for sufficient drying as well as protecting and providing easy storage in your recovery kit.

Warranty
  • Manufactured from CE certified, high tensile, UHMWPE (ISO 2307)
  • Instructions printed on storage bag and provided separately
  • Easy To Store In Vehicle And Does Not Rattle In Transport
  • Easy to store in vehicle and doesn't rattle in transport
  • UV-resistant properties, water-resistant, and floats
  • Flexible, attaches to most rated recovery points
  • Safer than a steel shackle when used correctly
  • Updated, longer size to suit more conditions
  • Updated slide lock loop, no draw string
  • Suitable for vehicles up to 3.5T
  • Updated braided outside shield
  • 14.5T breaking strength

Customer Reviews

Overall rating: 4.7 / 5 from 531 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕