📱 Call Us

FSD26 IS LIVE: Every $1 spent = 150 entries to win a 2024 F-350 Limited + $20,000 cash.
1 10
AWE Tuning

AWE Tuning 2020 Chevrolet Corvette (C8) Touring Edition Exhaust - Quad Diamond Black Tips

SKU: AWE3015-43159
$3,225.99
  • Make: Universal

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us
483750 Entries150X
This purchase enters you to win the FSD26 truck: a 2024 F-350 Limited + $20,000 cash. Ends October 18. See the truck

Presenting the Best Sounding Exhausts on the Planet™ for the C8 Corvette: At the intersection of sophistication and aggression lies the Touring Edition Exhaust. A dual 3” T304L stainless steel cat-back configuration, the AWE Touring Edition Exhaust is the perfect dose of steel for drivers looking for straight-pipe performance without sacrificing perfect daily drivability: a deep, sophisticated, exotic exhaust note with zero drone at highway speeds -- and V4 mode! Thanks to the asymmetric design, the number of necessary bends is minimized, thus removing the unwanted restriction in flow while facilitating impressive gains across the entire powerband. Paired with robust internally-lined stainless steel flex sections upstream, engine movement is significantly isolated, enabling life-long durability for peace of mind. Going the asymmetric approach also allowed us the opportunity of creating a bespoke cross-over section with entries from both the top and the bottom. Doing this we're able to achieve a rich and aggressive exhaust note out of the LT2 whether it be at idle, rev, or WOT. Beyond the unique crossover, the Touring Edition brings up the rear in proper fashion by featuring AWE’s patented drone-canceling solution, 180 Technology®, which targets and omits drone-prone frequencies while defeating the dreaded in-cabin tone change when switching between V4 and V8 modes. What’s this mean for you? You’ll be tuned into a pure, full-bodied LT2 soundtrack unlike any other without sacrificing in-cabin refinement, all while saving 31 lbs over stock. As a finishing touch, the included aluminum heat shield bolts to the bumper (via factory mounting locations) and resides neatly behind the exhaust, out of sight, with only an AWE logo showing through the rear mesh to let everyone know what team you're on. Why’d we go with an aluminum solution versus a heat blanket? Heat blankets are susceptible to waterlogging and material breakdown over extended periods of time.

  • Bespoke, valveless, asymmetric exhaust design unlock signature tone and performance for the C8 Corvette Stingray & E-Ray
  • Rigorously tested in a drag-environment, road-course environment and via long term street testing
  • Includes AWE AFM valve simulators, NPP valve simulators, and bespoke aluminum heat shield
  • Handcrafted from 3” CNC mandrel-bent, U.S.-made .065” wall T304L stainless steel
  • Engineered to defeat the dreaded in-cabin tone change between V4 and V8 modes
  • Robust 8” flex sections isolate engine movement and increase durability
  • Proudly engineered, designed, and manufactured in-house at AWE
  • Tip options include quad 4.5” double-walled slash-cut tips
  • Features AWE's patented drone-canceling 180 Technology®
  • Max gains of 19 hp and 15 lb-ft of torque at the wheels
  • Weight savings of 31 lbs compared to stock
  • No effect on factory emissions equipment
  • AWE Perfect fitment Guarantee
  • Direct bolt-on, no cutting
  • AWE Lifetime Warranty
  • AWE No CEL Guarantee

This Part Fits:

Year Make Model Submodel
2024-2026 Chevrolet Corvette E-Ray
2020-2026 Chevrolet Corvette Stingray

Customer Reviews

Overall rating: 4.7 / 5 from 531 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕