📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 12
Banks Power

Banks Power 11-16 Chevy/GMC 2500HD/3500HD Diesel 6.6L Boost Tube Upgrade Kit

SKU: GBE25993
$453.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

OEM replacements for left and right side boost tubes with silicone couplers. With up to 105% greater flow area compared to stock, these better-flowing intercooler tubes result in less boost pressure loss from the turbo to the intake manifold. This results in less work for the turbo, improving engine efficiency and power consistency. Banks hot and cold side Boost-Tubes have up to 105% greater flow area than stock. Produced from high-quality aluminized steel, the tubes are mandrel bent and a constant 3.5 inch diameter for quicker turbo spool. Better flowing intercooler tubes improve retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our powder-coat finish stops before the end of the tubes for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions. Spring-loaded constant tension clamps maintain a stronger grip to prevent leaks or blown boots. Works with stock or aftermarket intercooler with stock inlet and outlet size and location. Key Features: Complete set of left and right side boost tubes with silicone couplers. Huge increase in size and flow over stock (3.5in 2.5in/3.38in). Up to 105% greater flow area compared to stock. Mandrel-bent aluminized steel construction. Constant diameter tubing for the best flow. 4- and 5-ply heavy-duty silicone couplers. Spring-loaded constant tension clamps. Greater cooling capacity. Perfect fit and finish. Lower EGTs

Installation Instructions
  • Up to 105% greater flow area vs stock, Spools turbo faster with lower EGTs
  • Tube Has 2.375 in. Reduction

This Part Fits:

Year Make Model Submodel
2012 Chevrolet Express 2500 Base
2012 Chevrolet Express 3500 Base
2012 Chevrolet Express 3500 LS
2012 Chevrolet Express 3500 LT
2015-2016 Chevrolet Silverado 2500 HD High Country
2012-2016 Chevrolet Silverado 2500 HD LT
2012-2016 Chevrolet Silverado 2500 HD LTZ
2012-2016 Chevrolet Silverado 2500 HD WT
2015-2016 Chevrolet Silverado 3500 HD High Country
2012-2016 Chevrolet Silverado 3500 HD LT
2012-2016 Chevrolet Silverado 3500 HD LTZ
2012-2016 Chevrolet Silverado 3500 HD WT
2012 GMC Savana 2500 Base
2012 GMC Savana 3500 Base
2012 GMC Savana 3500 LS
2012 GMC Savana 3500 LT
2015-2016 GMC Sierra 2500 HD Base
2012-2016 GMC Sierra 2500 HD Denali
2012-2016 GMC Sierra 2500 HD SLE
2012-2016 GMC Sierra 2500 HD SLT
2012-2014 GMC Sierra 2500 HD WT
2015-2016 GMC Sierra 3500 HD Base
2012-2016 GMC Sierra 3500 HD Denali
2012-2016 GMC Sierra 3500 HD SLE
2012-2016 GMC Sierra 3500 HD SLT
2012-2014 GMC Sierra 3500 HD WT

Customer Reviews

Overall rating: 4.7 / 5 from 527 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕