The Banks AutoMind programmer comes ready to run with pre-loaded power right out of the box and right for the job at hand! Its calibrations were developed with power and increased MPG in mind. The AutoMind also provides service technician diagnostic capabilities with its ability to scan and clear vehicle trouble codes. Intense, usable, real horsepower only from Banks! Wrap Your Hand Around Some Serious Power! Introducing the latest in pre-loaded, pre-programmed power from the most trusted name in engineered engine efficiency. Banks is the only record-holding engine builder in the programming game, and now that expertise can be yours! The Banks AutoMind programmer comes ready to run with pre-loaded power right out of the box and right for the job at hand! Its calibrations were developed with power and increased MPG in mind. The AutoMind also provides service technician diagnostic capabilities with its ability to scan and clear vehicle trouble codes. Intense, usable, real horsepower only from Banks! Key Features: Delivers power on demand by removing the factory's power delay. Internet updatable. Flexible all-in-one programmer & scan tool. Displays critical engine functions. New and improved user interface. Full-color 2.8 inch screen. Adjust or remove engine rev and/or top speed limiter. Speedometer calibration based on tire size and/or gear ratio. Tuned for torque management and shift points/firmness. Monitor performance & fuel economy. Control cylinder deactivation features. Read and clear trouble codes. Updatable, Windows 7 (or newer) and Mac OS. NOTE: Features vary by application. See description for specific details.Important Notes: -Features vary by application. See description for specific details. -This product not intended for use on vehicles that originated as cab-and-chassis vehicles or that were built for use in Mexico. Use of the Banks AutoMind on these vehicles will result in improper running and a partially disabled vehicle
Adds up to +40 hp & +63 lb-ft, 4 second faster 0-100 acceleration
Updatable Windows 7 or newer and Mac OS
This Part Fits:
Year
Make
Model
Submodel
2010
Ford
E-150
Base
2010
Ford
E-150
XL
2010
Ford
E-150
XLT
2003-2005
Ford
Excursion
Eddie Bauer
2000-2005
Ford
Excursion
Limited
2004-2005
Ford
Excursion
XLS
2000-2005
Ford
Excursion
XLT
1999-2010
Ford
Expedition
Eddie Bauer
2007-2010
Ford
Expedition
EL Eddie Bauer
2008-2011
Ford
Expedition
EL King Ranch
2007-2011
Ford
Expedition
EL Limited
2011
Ford
Expedition
EL XL
2007-2011
Ford
Expedition
EL XLT
2008
Ford
Expedition
Funkmaster Flex Edition
2006,2008-2011
Ford
Expedition
King Ranch
2005-2011
Ford
Expedition
Limited
2004
Ford
Expedition
NBX
2011
Ford
Expedition
XL
2004-2006
Ford
Expedition
XLS
1999-2011
Ford
Expedition
XLT
2004,2006
Ford
Expedition
XLT Sport
1999-2010
Ford
Explorer
Eddie Bauer
1999-2010
Ford
Explorer
Limited
2004
Ford
Explorer
NBX
2000-2003
Ford
Explorer
Postal
1999-2000
Ford
Explorer
Sport
1999
Ford
Explorer
XL
2000-2001
Ford
Explorer
XL Fleet
1999-2006
Ford
Explorer
XLS
2004-2005
Ford
Explorer
XLS Sport
1999-2010
Ford
Explorer
XLT
2004-2005
Ford
Explorer
XLT Sport
2001-2002
Ford
Explorer Sport
Base
2003
Ford
Explorer Sport
XLS
2003
Ford
Explorer Sport
XLT
1999-2000
Ford
F-150
Base
2007-2008,2010-2014
Ford
F-150
FX2
2004-2014
Ford
F-150
FX4
2000-2003,2006-2008,2010-2012
Ford
F-150
Harley-Davidson Edition
2001-2003,2005-2018
Ford
F-150
King Ranch
1999-2018
Ford
F-150
Lariat
2011
Ford
F-150
Lariat Limited
1999-2003
Ford
F-150
Lightning
2008,2013-2014,2016-2018
Ford
F-150
Limited
2009-2018
Ford
F-150
Platinum
2018
Ford
F-150
Police Responder
2017-2018
Ford
F-150
Raptor
2016-2018
Ford
F-150
SSV
2004-2014
Ford
F-150
STX
2011-2014
Ford
F-150
SVT Raptor
2008
Ford
F-150
THE 60TH ANNIVERSARY EDITION
1999-2018
Ford
F-150
XL
1999-2018
Ford
F-150
XLT
2004
Ford
F-150 Heritage
SVT Lightning
2004
Ford
F-150 Heritage
XL
2004
Ford
F-150 Heritage
XLT
1999
Ford
F-250
Base
1999
Ford
F-250
Lariat
1999
Ford
F-250
XL
1999
Ford
F-250
XLT
2009-2010
Ford
F-250 Super Duty
Cabela's
2008-2009
Ford
F-250 Super Duty
FX4
2004-2010
Ford
F-250 Super Duty
Harley-Davidson Edition
2004-2019
Ford
F-250 Super Duty
King Ranch
1999-2019
Ford
F-250 Super Duty
Lariat
2018-2019
Ford
F-250 Super Duty
Limited
2013-2019
Ford
F-250 Super Duty
Platinum
1999-2019
Ford
F-250 Super Duty
XL
1999-2019
Ford
F-250 Super Duty
XLT
2009-2010
Ford
F-350 Super Duty
Cabela's
2008-2009
Ford
F-350 Super Duty
FX4
2004-2010
Ford
F-350 Super Duty
Harley-Davidson Edition
2003-2019
Ford
F-350 Super Duty
King Ranch
1999-2019
Ford
F-350 Super Duty
Lariat
2018-2019
Ford
F-350 Super Duty
Limited
2013-2019
Ford
F-350 Super Duty
Platinum
1999-2019
Ford
F-350 Super Duty
XL
1999-2019
Ford
F-350 Super Duty
XLT
2004-2014
Ford
Mustang
Base
2012-2013
Ford
Mustang
Boss 302
2008-2009,2019
Ford
Mustang
Bullitt
1999-2019
Ford
Mustang
GT
2015
Ford
Mustang
GT 50 Years Limited Edition
2001
Ford
Mustang
GT Bullitt
2015-2019
Ford
Mustang
GT Premium
2003-2004
Ford
Mustang
Mach 1
2007-2008
Ford
Mustang
Shelby GT
1999,2001,2003-2004
Ford
Mustang
SVT Cobra
2003
Ford
Mustang
SVT Cobra 10th Anniversary
2001-2005
Ford
Ranger
Edge
2005-2009
Ford
Ranger
FX4
2006-2010
Ford
Ranger
Sport
2005-2007
Ford
Ranger
STX
2004
Ford
Ranger
Tremor
1999-2010
Ford
Ranger
XL
1999-2010
Ford
Ranger
XLT
2006-2007
Lincoln
Mark LT
Base
1999-2005,2008-2010
Lincoln
Navigator
Base
2008-2010
Lincoln
Navigator
L
2007
Lincoln
Navigator
L Luxury
2007
Lincoln
Navigator
L Ultimate
2006-2007
Lincoln
Navigator
Luxury
2006-2007
Lincoln
Navigator
Ultimate
Customer Reviews
Overall rating: 4.7 / 5 from 549 reviews.
First off super happy with the product from quality to fit. This was my first install and it was quite easy all the necessary hardware was there. I was looking for mid price head studs and I’ll say I love them I have a 100% and a s480 I’ve had no problems with it and I beat on it every day. 10/10 recommend.
put in the billet heat exchanger and when removing the old trans lines one of the lines bent when loosening nut. Great quality line fits perfectly way better than factory!
Fit perfectly in the stock location and is way bigger than stock and shipped fast. Would recommend full send diesel to anyone looking at these type of parts!
I had a few questions about the install. I called and left a message and then shortly there after my call was returned with the answers I needed. Appreciate the help.
The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.
It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit.
1. You have to be very careful about how the lines are run to prevent the hose from kinking.
2. There are no p clamps or hardware included to hold the lines in place.
To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.
It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock
AN line came apart on the hose barb with the clamping nut still tight within 2k miles. Almost nuked a brand new transmission before i could get it to the shoulder.
I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings
Awesome upper coolant pipe. Just what I wanted polished to go with my other parts. Great price and fast shipping. Also entries to possibly win a bad ass Cummins.
Great replacement transmission line kit for the 4th gen trucks. Other thing I added was heat sock around the lines running by the turbo and down pipe. Also got another transmission by pass block that has removable line adapters, so you can use the AN adapters.
I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.
Had a confusion on core for the value body. But once figured out the kit can in a week or less. Pretty easy install. Quality is super high and looks amazing.
I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.
Banks Power 99-15 Ford Diesel/Gas (Except Motorhome and Van) AutoMind Programmer - Hand Held
$463.99
Unit price /
Unavailable
The Banks AutoMind programmer comes ready to run with pre-loaded power right out of the box and right for the job at hand! Its calibrations were developed with power and increased MPG in mind. The AutoMind also provides service technician diagnostic capabilities with its ability to scan and clear vehicle trouble codes. Intense, usable, real horsepower only from Banks! Wrap Your Hand Around Some Serious Power! Introducing the latest in pre-loaded, pre-programmed power from the most trusted name in engineered engine efficiency. Banks is the only record-holding engine builder in the programming game, and now that expertise can be yours! The Banks AutoMind programmer comes ready to run with pre-loaded power right out of the box and right for the job at hand! Its calibrations were developed with power and increased MPG in mind. The AutoMind also provides service technician diagnostic capabilities with its ability to scan and clear vehicle trouble codes. Intense, usable, real horsepower only from Banks! Key Features: Delivers power on demand by removing the factory's power delay. Internet updatable. Flexible all-in-one programmer & scan tool. Displays critical engine functions. New and improved user interface. Full-color 2.8 inch screen. Adjust or remove engine rev and/or top speed limiter. Speedometer calibration based on tire size and/or gear ratio. Tuned for torque management and shift points/firmness. Monitor performance & fuel economy. Control cylinder deactivation features. Read and clear trouble codes. Updatable, Windows 7 (or newer) and Mac OS. NOTE: Features vary by application. See description for specific details.Important Notes: -Features vary by application. See description for specific details. -This product not intended for use on vehicles that originated as cab-and-chassis vehicles or that were built for use in Mexico. Use of the Banks AutoMind on these vehicles will result in improper running and a partially disabled vehicle
Adds up to +40 hp & +63 lb-ft, 4 second faster 0-100 acceleration