📱 Call Us

FSD26 IS LIVE: Every $1 spent = 150 entries to win a 2024 F-350 Limited + $20,000 cash.
Cognito

Cognito 19-24 Chevy/GMC Silv/Sierra 1500 2WD/4WD 6in Elite Lift Kit w/ Fox 2.5 Elite Perf Series

SKU: COG210-P1224
$8,466.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us
1269900 Entries150X
This purchase enters you to win the FSD26 truck: a 2024 F-350 Limited + $20,000 cash. Ends October 18. See the truck

We have bundled everything you need in a lift kit for your Silverado/Sierra 1500 2WD/4WD with high quality Cognito components. There is no guesswork. Cognito components are engineered, manufactured, and assembled in the USA.The Cognito 6-inch Elite lift kit package has everything you need to get your GM 1500 truck up in the air to clear 35s on a 10" wide wheel. Defined by the Fox 2.5" Performance Elite series shocks, you will be stunned at how nice the ride quality is, and your truck will have the look and ride that the rest of the crowd desires. Most others dont even consider adding a stiffer sway bar to accomodate the taller center of gravity, but it is included in this package. If your truck is a 4wd, you must add on the CV driveline which is sold separately.The Cognito Front Lift kit is designed and engineered to offer superior ride quality and corrected CV joint angles.The Cognito Ball Joint SM Series Upper Control Arms add style, function, and performance to your vehicle by correcting the Ball Joint angle for lifted and leveled applications and improving the allowable droop travel for a better ride quality. The control arm kit features boxed sheet metal arms that are CNC robot welded and powder coated semi-gloss black. Ball joints are included as well as new crush sleeves and polyurethane bushings.Â

  • Warning! - This product requires bypassing ARC Adaptive Ride Control system (1500 Denali models).
  • Warning! - Not compatible with trucks equipped with composite mono-leaf rear spring.
  • CV Front Driveline is required on 4WD models if operating in 4WD above 20mph
  • Maintains Adequate Droop Travel for Superior Ride Quality
  • Yields 6 inches of front lift and 4 inches of rear lift
  • Fox 2.5" Elite Performance Series Shocks
  • SM Series Ball Joint Upper Control Arms
  • 6-inch Front Lift Components
  • 2-inch lift Deaver mini pack
  • Levels vehicle front to rear
  • 2-inch block and U-bolt kit
  • Improved ball joint angle
  • 14-hour DIY install time
  • Made in the USA

This Part Fits:

Year Make Model Submodel
2019-2025 Chevrolet Silverado 1500 Custom
2019-2025 Chevrolet Silverado 1500 Custom Trail Boss
2019-2025 Chevrolet Silverado 1500 High Country
2019-2025 Chevrolet Silverado 1500 LT
2019-2025 Chevrolet Silverado 1500 LT Trail Boss
2019-2025 Chevrolet Silverado 1500 LTZ
2019-2025 Chevrolet Silverado 1500 RST
2019-2025 Chevrolet Silverado 1500 WT
2022-2025 Chevrolet Silverado 1500 ZR2
2019-2025 GMC Sierra 1500 AT4
2022-2025 GMC Sierra 1500 AT4X
2019-2021 GMC Sierra 1500 Base
2019-2025 GMC Sierra 1500 Denali
2022-2025 GMC Sierra 1500 Denali Ultimate
2019-2025 GMC Sierra 1500 Elevation
2022-2025 GMC Sierra 1500 Pro
2019-2025 GMC Sierra 1500 SLE
2019-2025 GMC Sierra 1500 SLT

Customer Reviews

Overall rating: 4.7 / 5 from 534 reviews.

Customer photo review of FSD 1998.5- Present 24V Cummins Clamp Lock Head Stud Kit

First off super happy with the product from quality to fit. This was my first install and it was quite easy all the necessary hardware was there. I was looking for mid price head studs and I’ll say I love them I have a 100% and a s480 I’ve had no problems with it and I beat on it every day. 10/10 recommend.

Jacob O. 5/5 Verified

FSD 1998.5- Present 24V Cummins Clamp Lock Head Stud Kit

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕