📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 10
Eibach

Eibach Pro-Spacer 10mm Spacer / Bolt Pattern 5x112 / Hub Center 66.5 for 05-10 Mercedes-Benz CLS

SKU: EIBS90-2-10-002
$140.99
  • Make: Universal

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

Eibach PRO-SPACER wheel spacers for cars, trucks, and UTVs are the ideal solution for improving stability and handling, increasing clearance for larger tires, and giving your vehicle that aggressive and commanding presence. By widening the vehicle's track width, wheel spacers lower the center of gravity, reduce body roll, and ultimately enhance capability of your vehicle on- or off-road.

Warranty
Installation Instructions
  • Precision Engineered Hub-Centric - for Perfect Fit and Wheel Balance.
  • Made from High-Strength Aircraft-Aluminum Alloy.
  • Reduced Weight Compared to Steel Wheel Spacers.
  • Widen Your Stance - For Better Handling.

This Part Fits:

Year Make Model Submodel
2014-2018,2020 BMW i3 Range Extender
2004-2007 Chrysler Crossfire Base
2005-2008 Chrysler Crossfire Limited
2005-2006 Chrysler Crossfire SRT-6
1981-1985 Mercedes-Benz 300SD Base
1991-1993 Mercedes-Benz 300SE Base
1982-1983 Mercedes-Benz 380SEC Base
1981-1983 Mercedes-Benz 380SEL Base
1992 Mercedes-Benz 400SE Base
1984-1985 Mercedes-Benz 500SEC Base
1992-1993 Mercedes-Benz 500SEL Base
1994-1996 Mercedes-Benz C220 Base
1997-1998 Mercedes-Benz C230 Base
2000,2002-2005 Mercedes-Benz C230 Kompressor
2006-2007 Mercedes-Benz C230 Sport
2003-2005 Mercedes-Benz C240 4Matic
2001-2005 Mercedes-Benz C240 Base
1994-2000 Mercedes-Benz C280 Base
2019,2022-2023 Mercedes-Benz C300 4Matic
2015-2020,2022-2023 Mercedes-Benz C300 Base
2002-2004 Mercedes-Benz C32 AMG Base
2003-2005 Mercedes-Benz C320 4Matic
2001-2005 Mercedes-Benz C320 Base
2006-2007 Mercedes-Benz C350 4Matic
2006-2007 Mercedes-Benz C350 Luxury
2006-2007 Mercedes-Benz C350 Sport
1995-1997 Mercedes-Benz C36 AMG Base
1998-2000 Mercedes-Benz C43 AMG Base
2015-2020 Mercedes-Benz C63 AMG Base
1998-2004 Mercedes-Benz CL500 Base
1998-1999,2001-2004 Mercedes-Benz CL600 Base
2014-2016,2018 Mercedes-Benz CLA250 Base
2002-2005 Mercedes-Benz CLK320 Base
2002-2003 Mercedes-Benz CLK430 Base
2003-2006 Mercedes-Benz CLK500 Base
2006 Mercedes-Benz CLS500 Base
2006 Mercedes-Benz CLS55 AMG Base
2007-2010 Mercedes-Benz CLS550 Base
2007-2010 Mercedes-Benz CLS63 AMG Base
2019 Mercedes-Benz E300 4Matic
1997-1999,2017-2019 Mercedes-Benz E300 Base
1998-2005 Mercedes-Benz E320 4Matic
1995-2005 Mercedes-Benz E320 Base
2007-2009 Mercedes-Benz E320 Bluetec
2005-2006 Mercedes-Benz E320 CDI
2010 Mercedes-Benz E350 4Matic
2006-2013 Mercedes-Benz E350 Base
2011-2013 Mercedes-Benz E350 Bluetec
1994-1995,1997 Mercedes-Benz E420 Base
2000-2002 Mercedes-Benz E430 4Matic
1998-2002 Mercedes-Benz E430 Base
2015-2023 Mercedes-Benz GLA250 4Matic
2015-2023 Mercedes-Benz GLA250 Base
1998-2003 Mercedes-Benz ML320 Base
2006-2011 Mercedes-Benz ML350 4Matic
2009-2011 Mercedes-Benz ML350 Base
2010-2011 Mercedes-Benz ML350 Bluetec 4Matic
1999-2001 Mercedes-Benz ML430 Base
2006-2007 Mercedes-Benz ML500 Base
1994-1999 Mercedes-Benz S320 LWB
1994-1999 Mercedes-Benz S320 SWB
1994-1999 Mercedes-Benz S420 Base
2000-2005 Mercedes-Benz S430 Base
1995-2005 Mercedes-Benz S500 Base
2000-2001 Mercedes-Benz S500 Guard
1994-1995,1998-1999,2001-2005 Mercedes-Benz S600 Base
2001-2003 Mercedes-Benz SL500 Base
1998-2004 Mercedes-Benz SLK230 Kompressor
2001-2004 Mercedes-Benz SLK320 Base

Customer Reviews

Overall rating: 4.7 / 5 from 529 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕