📱 Call Us

FSD26 IS LIVE: Every $1 spent = 150 entries to win a 2024 F-350 Limited + $20,000 cash.
1 5
Fleece Performance

Fleece Performance 2004.5-2010 Chevy/GMC 6.6L LLY/LBZ/LMM Duramax 63mm STREET VNT Cheetah Turbo w/ HX40 Outlet

SKU: FPEFPE-VNT63-STREET
$2,916.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us
437400 Entries150X
This purchase enters you to win the FSD26 truck: a 2024 F-350 Limited + $20,000 cash. Ends October 18. See the truck

The Duramax VNT Cheetah Turbocharger is a drop-in replacement turbocharger for 04.5-10 Duramax diesels. It comes with a Fleece Performance 63mm FMW compressor wheel and 66mm high flow turbine wheel. This drop-in replacement turbo is guaranteed to enhance your driving experience. You'll enjoy the spool up and throttle response of a small turbo and still get the big top end power you're looking for. Rated at 625 RWHP this is the ultimate combination for dual purpose applications. If you are towing during the week, and sled pulling on the weekend, the 63mm VNT Cheetah is just the ticket. Stock Appearing: 100% Stock Appearing. This turbocharger uses the stock housings with updated internals. This allows you to keep all factory systems intact yet allow you to safely run 40-45 PSI of boost. Proven Technology: These turbochargers are built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings. No other drop in replacement aftermarket VNT turbo on the market can offer you that. Powerful Yet Responsive: These turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end. Exclusive FMW Wheel Technology: Forged Milled Wheels are Stronger than Billet Faster Spool-Up Increased Throttle Response Broader Torque Curve

Datasheet
Warranty

This Part Fits:

Year Make Model Submodel
2004-2005 Chevrolet Silverado 2500 HD Base
2004-2006 Chevrolet Silverado 2500 HD LS
2004-2010 Chevrolet Silverado 2500 HD LT
2007-2010 Chevrolet Silverado 2500 HD LTZ
2004-2010 Chevrolet Silverado 2500 HD WT
2007 Chevrolet Silverado 2500 HD Classic LS
2007 Chevrolet Silverado 2500 HD Classic LT
2007 Chevrolet Silverado 2500 HD Classic WT
2004-2005 Chevrolet Silverado 3500 Base
2004-2006 Chevrolet Silverado 3500 LS
2004-2006 Chevrolet Silverado 3500 LT
2004,2006 Chevrolet Silverado 3500 WT
2007 Chevrolet Silverado 3500 Classic LS
2007 Chevrolet Silverado 3500 Classic LT
2007 Chevrolet Silverado 3500 Classic WT
2007-2010 Chevrolet Silverado 3500 HD LT
2007-2010 Chevrolet Silverado 3500 HD LTZ
2007-2010 Chevrolet Silverado 3500 HD WT
2004-2005 GMC Sierra 2500 HD Base
2006 GMC Sierra 2500 HD SL
2004-2010 GMC Sierra 2500 HD SLE
2004-2010 GMC Sierra 2500 HD SLT
2004-2010 GMC Sierra 2500 HD WT
2007 GMC Sierra 2500 HD Classic SL
2007 GMC Sierra 2500 HD Classic SLE
2007 GMC Sierra 2500 HD Classic SLT
2007 GMC Sierra 2500 HD Classic WT
2004-2005 GMC Sierra 3500 Base
2006 GMC Sierra 3500 SL
2004-2006 GMC Sierra 3500 SLE
2004-2006 GMC Sierra 3500 SLT
2004-2006 GMC Sierra 3500 WT
2007 GMC Sierra 3500 Classic SL
2007 GMC Sierra 3500 Classic SLE
2007 GMC Sierra 3500 Classic SLT
2007 GMC Sierra 3500 Classic WT
2007-2010 GMC Sierra 3500 HD SLE
2007-2010 GMC Sierra 3500 HD SLT
2007-2010 GMC Sierra 3500 HD WT

Customer Reviews

Overall rating: 4.7 / 5 from 529 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕