📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 15
Husky Liners

Husky Liners 15-23 Chevrolet Express/GMC Savana 1500/2500/3500 WeatherBeater Black Floor Liners

SKU: HSL18741
$81.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

Expand the Husky Liner protection you love from bumper to bumper, with Weatherbeater? Cargo Liners. These all-weather, any-conditions liners are ready for anything you throw in the back and stand up to even the toughest spills. Husky?s rubberized DuraGrip? surface and ProGard? formula keep cargo protected with durable flexibility, and no shifting around. Installs in minutes and stays in place until you?re ready to take out and clean. Available in black, gray, or tan for a factory look to match your vehicle?s interior. Backed by Husky Liners Guaranteed for Life. Proudly made in the U.S.A.

Warranty
Installation Instructions
  • Weatherbeater? premium liner material is super-tough and resilient. Stands up to battery acid, oil and conditions from sub-zero to blistering hot. Strong yet pliable, for a smooth, even look and feel.
  • Weatherbeater? cargo liners are easy to remove and easy to clean up. Just spray it down, shake it off, and it?s back on the job. Built for hassle-free maintenance for life.
  • Our FormFit? design process gives you a glove-like fit. Cargo areas are 3D laser-scanned. A better-than-factory fit for your make & model.
  • The FormFit? edge gives you extra protection from spillover around the edges, with a raised lip to keep everything contained.
  • The Formfit Edge Gives You Extra Protection From Spillover Around The Edges w/A Raised Lip To Keep Everything Contained
  • Made with our ProGard? formula to deliver a tough-yet-flexible design that installs easily and cleans up quickly.
  • Husky Liners? Weatherbeater? Cargo Liners stand up to everyday life, and stay like new. Proudly made in the USA.
  • Made With Our Progard Formula To Deliver A Tough-Yet-Flexible Design That Installs Easily And Cleans Up Quickly
  • Weatherbeater Premium Liner Material Is Super-Tough And Resilient/Stands Up To Battery Acid/Oil And Conditions
  • Husky Liners Weatherbeater Cargo Liners Stand Up To Everyday Life And Stay Like New/Proudly Made In The USA
  • Just Spray It Down/Shake It Off/And It Is Back On The Job/Built For Hassle/Free Maintenance For Life
  • A solid foundation to protect any type of cargo. No slipping, no sliding, no nonsense.
  • From Sub-Zero To Blistering Hot/Strong Yet Pliable/For A Smooth/Even Look And Feel
  • A Solid Foundation To Protect Any Type Of Cargo/No Slipping/No Sliding/No Nonsense
  • Cargo Areas Are 3D Laser-Scanned/A Better-Than-Factory Fit For Your Make And Model
  • Easy to install, remove, and clean. Just yank it out, hose it down and carry on.
  • Easy To Install/Remove And Clean/Just Yank It Out/Hose It Down And Carry On
  • Weatherbeater Cargo Liners Are Easy To Remove And Easy To Clean Up
  • Our Formfit Design Process Gives You A Glove-Like Fit

This Part Fits:

Year Make Model Submodel
2015-2023 Chevrolet Express 2500 Base
2015-2023 Chevrolet Express 2500 LS
2015-2023 Chevrolet Express 2500 LT
2015-2023 Chevrolet Express 3500 Base
2015-2023 Chevrolet Express 3500 LS
2015-2023 Chevrolet Express 3500 LT
2015-2023 GMC Savana 2500 Base
2015-2023 GMC Savana 2500 LS
2015-2023 GMC Savana 2500 LT
2015-2023 GMC Savana 3500 Base
2015-2023 GMC Savana 3500 LS
2015-2023 GMC Savana 3500 LT

Customer Reviews

Overall rating: 4.7 / 5 from 529 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕