📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 3
Husky Liners

Husky Liners 17-24 Chrysler Pacifica Aeroskin Hood Protector - Smoke

SKU: HSL2842194
$100.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.

Installation Instructions
  • Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
  • Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
  • Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
  • Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
  • The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
  • The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
  • Available in dark smoke finish for a perfect complement to virtually any vehicle.
  • Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
  • Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
  • Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]

This Part Fits:

Year Make Model Submodel
2020 Chrysler Pacifica AWD Launch Edition
2026 Chrysler Pacifica Hybrid 100th Anniversary Edition
2025 Chrysler Pacifica Hybrid FAV Edition
2018-2023 Chrysler Pacifica Hybrid Limited
2021-2026 Chrysler Pacifica Hybrid Pinnacle
2017 Chrysler Pacifica Hybrid Platinum
2017 Chrysler Pacifica Hybrid Premium
2024 Chrysler Pacifica Hybrid Premium S Appearance
2024 Chrysler Pacifica Hybrid Road Tripper
2024-2025 Chrysler Pacifica Hybrid S Appearance
2024-2026 Chrysler Pacifica Hybrid Select
2026 Chrysler Pacifica Hybrid Select Premium
2020-2021 Chrysler Pacifica Hybrid Touring
2018-2023 Chrysler Pacifica Hybrid Touring L
2018-2019 Chrysler Pacifica Hybrid Touring Plus
2018-2019 Chrysler Pacifica L
2017-2026 Chrysler Pacifica Limited
2017-2019 Chrysler Pacifica LX
2021-2026 Chrysler Pacifica Pinnacle
2025-2026 Chrysler Pacifica Select
2017-2024 Chrysler Pacifica Touring
2017-2024 Chrysler Pacifica Touring L
2017-2020 Chrysler Pacifica Touring L Plus
2018-2019 Chrysler Pacifica Touring Plus
2020-2021 Chrysler Voyager L
2020-2026 Chrysler Voyager LX
2020-2021 Chrysler Voyager LXi

Customer Reviews

Overall rating: 4.7 / 5 from 529 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕