📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 27
Husky Liners

Husky Liners 21-23 Ford F-150 RVL Fender Flares - 4 Piece Set

SKU: HSL2802968
$423.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

Treat your vehicle to the added protection and visibility delivered by Husky RVL Fender Flares. These innovative, low-profile flares not only feature an integrated LED running light/turn signal, they also seamlessly transition into a mud flap at the rear. It's double-duty protection that perfectly blends with the contours of your make and model, while adding two inches of protection beyond factory-tire width. Rugged, Dura-Flex(R) 2000 ABS construction gives you a UV-resistant, flexible fender flare tough enough to maintain its integrity for years to come. Installs in minutes with all necessary hardware included. Available in a smooth, matte black, paint-ready finish and backed by Husky's limited lifetime warranty.

Installation Instructions
  • Features proprietary Dura-Flex(R) 2000 ABS construction for impact and UV resistance. Its low-profile design extends past the fender of vehicle adding two inches of protection for extra-wide tires.
  • Husky RVL Fender Flares feature a functional mud flap that seamlessly transitions to an extended mud flap at the rear. Giving your vehicle double-duty protection in a one-of-a-kind fender flare.
  • RVL Fender Flares feature an integrated running light/turn signal at the top of each wheel arch for added visibility at night or in low lighting conditions.
  • Installing Husky RVL Fender Flares is a snap. They're easy to mount in minutes with all necessary hardware included (varies by vehicle make and model).
  • Husky RVL Fender Flares are built to last and covered by our limited lifetime warranty against warping, cracking or other factory defects.
  • Husky Rvl Fender Flares Feature A Functional Mud Flap That Seamlessly Transitions To An Extended Mud Flap At The Rear
  • Its Low-Profile Design Extends Past The Fender Of Vehicle Adding Two Inches Of Protection For Extra-Wide Tires
  • They Are Easy To Mount In Minutes With All Necessary Hardware Included [Varies By Vehicle Make And Model]
  • RVL Fender Flares Feature An Integrated Running Light/Turn Signal At The Top Of Each Wheel Arch
  • And Covered By Our Limited Lifetime Warranty Against Warping/Cracking Or Other Factory Defects
  • Available in a smooth, matte black finish that's ready to paint if you choose (not necessary)
  • Available In A Smooth/Matte Black Finish Thats Ready To Paint If You Choose [Not Necessary]
  • Features Proprietary Dura-Flex[R] 2000 ABS Construction For Impact And UV Resistance
  • Giving Your Vehicle Double-Duty Protection In A One-Of-A-Kind Fender Flare
  • For Added Visibility At Night Or In Low Lighting Conditions
  • Installing Husky RVL Fender Flares Is A Snap
  • Husky RVL Fender Flares Are Built To Last

This Part Fits:

Year Make Model Submodel
2021-2026 Ford F-150 King Ranch
2021-2026 Ford F-150 Lariat
2021-2023 Ford F-150 Limited
2021-2026 Ford F-150 Platinum
2021-2026 Ford F-150 Police Responder
2022,2024-2025 Ford F-150 Raptor
2021-2026 Ford F-150 SSV
2024-2026 Ford F-150 STX
2021-2026 Ford F-150 Tremor
2021-2026 Ford F-150 XL
2021-2026 Ford F-150 XLT

Customer Reviews

Overall rating: 4.7 / 5 from 529 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕