📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 10
K&N Engineering

K&N Oil Filter for 2005-2014 BMW K1200 GT/R/RS/S/ K1300 GT/R/S/ R1200 GS/R/RT S1000RR

SKU: KNNKN-160
$18.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

K&N® premium oil filters for powersports vehicles utilize an innovative, highly efficient synthetic-blend filtration media designed to be compatible with synthetic, petroleum-based, and blended oils, including the high concentrations of synthetic racing oils. The heavy-duty canister is engineered to be exceptionally durable, and a 17mm welded hex nut can be used for quick and easy filter removal. Engineered to support exceptionally high flow rates while providing outstanding protection from harmful engine contaminants, each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N® 1-Year Limited Warranty.

  • Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
  • Designed to allow high flow rates and a consistent flow of oil to your engine
  • Designed to operate with all synthetic, conventional, and blended motor oils
  • Pleated synthetic-blend filtration media removes most harmful contaminants
  • Fast and easy Wrench-Off® removal using the welded 17mm hex nut
  • Heavy-duty canister for outstanding durability
  • Pre-drilled nut for safety wire attachment
  • 1-Year Limited Warranty

This Part Fits:

Year Make Model Submodel
2014 Bimota BB3 Base
2008-2012 BMW F650GS Base
2013-2018 BMW F700GS Base
2018-2022 BMW F750GS Base
2021 BMW F750GS 40 Years GS Edition Base
2008-2012,2015-2018,2024-2025 BMW F800GS Base
2015-2018 BMW F800GS Adventure Base
2013-2016 BMW F800GT Base
2010-2017 BMW F800R Base
2018-2023 BMW F850GS Base
2021 BMW F850GS 40 Years GS Edition Base
2018-2023 BMW F850GS Adventure Base
2021 BMW F850GS Adventure 40 Years GS Edition Base
2024-2025 BMW F900GS Base
2024-2025 BMW F900GS Adventure Base
2020-2025 BMW F900R Base
2020-2022,2025 BMW F900XR Base
2013-2016 BMW HP4 Base
2014 BMW HP4 Competition Base
2018 BMW HP4 RACE Base
2005-2008 BMW K1200GT Base
2005-2008 BMW K1200R Base
2007-2008 BMW K1200R Sport Base
2005 BMW K1200RS Base
2005-2008 BMW K1200S Base
2009-2010 BMW K1300GT Base
2009-2011 BMW K1300R Base
2009-2016 BMW K1300S Base
2013 BMW K1300S 30 Jahre K-Modelle Base
2023-2025 BMW M1000R Base
2021-2024 BMW M1000RR Base
2022 BMW M1000RR 50 Years M Base
2025 BMW M1000XR Base
2013-2018 BMW R1200GS Base
2014-2018 BMW R1200GS Adventure Base
2016-2018 BMW R1200R Base
2015-2018 BMW R1200RS Base
2013,2015-2018 BMW R1200RT Base
2019-2023 BMW R1250GS Base
2021-2022 BMW R1250GS 40 Years GS Edition Base
2019-2024 BMW R1250GS Adventure Base
2021-2022 BMW R1250GS Adventure 40 Years GS Edition Base
2020-2024 BMW R1250R Base
2019-2024 BMW R1250RS Base
2019-2024 BMW R1250RT Base
2014-2019,2021-2025 BMW S1000R Base
2010-2025 BMW S1000RR Base
2015-2025 BMW S1000XR Base
2012 Husqvarna Nuda 900R Base

Customer Reviews

Overall rating: 4.7 / 5 from 529 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕