📱 Call Us

FSD26 IS LIVE: Every $1 spent = 150 entries to win a 2024 F-350 Limited + $20,000 cash.
KC HiLiTES

KC HiLiTES 20+ Jeep Wrangler/Gladiator Mojave Gravity Titan Overhead Light Bar

SKU: KCLAK-91426
$3,088.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us
463200 Entries150X
This purchase enters you to win the FSD26 truck: a 2024 F-350 Limited + $20,000 cash. Ends October 18. See the truck

At the center of the system is the Gravity Titan LED Light Bar, KC's most advanced lighting platform. Powered by the Titan Core and 3-Source LED optics, Titan produces a larger illumination zone, increased peak intensity, and greater beam distance than previous Gravity platforms. Dual Power Modes allow you to switch between full High Power Mode for nighttime driving and an integrated Amber Dust Light that acts as a highly visible marker in dusty, snowy, or low-visibility conditions. The system is completed with Jeep Wrangler 392 / Gladiator Mojave overhead mounting brackets built from heavy-duty steel and finished in a black powder coat. Designed for a precise fit on these factory-equipped models, the brackets provide a secure mounting solution engineered to withstand aggressive off-road use while maintaining compatibility with OEM components.

  • Gravity Reflective Diode Technology: Ensures unmatched beam precision and efficiency, providing brighter and more focused light
  • Linkable and Curvable: Patented Infinity Ring system offers expandable widths and the option to curve or straighten your setup
  • Dual Power Modes: Amber LED Dust Light: Highly visible marker for low-visibility conditions
  • MoistureBlock Technology: Integrated weather-sealed plug protects against water intrusion
  • 1x Pair of Jeep Wrangler 392/Gladiator Mojave overhead mounting brackets (SKU 7328)
  • 3-Source LED Optics: Delivers comprehensive mid- and long-range lighting coverage
  • Vehicle Fitment: 2021-2026 Jeep Wrangler 392/2020-2026 Jeep Gladiator Mojave
  • Titan Core: Patented Pass-Through Front Cooling: Superior thermal management
  • High-Power Mode: Intense forward-facing illumination for nighttime trail use
  • Installation: Bolt-on installation using factory mounting locations
  • For Jeep Wrangler NON-392/Gladiator Mojave Trims, see SKU AK-91424
  • 1x Gravity Titan 50" LED Light Bar 8-Light Combo Beam (SKU 91418)
  • 8x Gravity 6" Light Covers – Black with Yellow KC Logo
  • 1x Complete Wiring Kit with 3-Position Switch
  • Mounting Location: Overhead/windshield
  • Fitment & Installation Notes
  • 1x Cover Removal Tool
  • WHAT'S INCLUDED
  • FEATURES

This Part Fits:

Year Make Model Submodel
2020-2025 Jeep Gladiator Mojave
2024-2025 Jeep Gladiator Mojave X
2023-2024 Jeep Wrangler Rubicon 392
2024-2025 Jeep Wrangler Rubicon 392 Final Edition
2021-2022 Jeep Wrangler Unlimited Rubicon 392

Customer Reviews

Overall rating: 4.7 / 5 from 530 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕