📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 50
Magnaflow

MagnaFlow Conv Chevrolet-Geo-Toyota 12.5X6.5X

SKU: MAG23886
$237.99
  • Make: Universal

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23886. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 23886 includes (2) Flat Ring Gaskets and interchanges with OE parts 17410-16880, 18450-01090, 18450-01100, 18450-08030, 18450-08040, 18450-11160, 18450-16050, 18450-16140, 18450-16260, 18450-16340, 18450-16480, 18450-16490, 18450-16680, 18450-35020, 18450-35090, 18450-35140, 18450-43030, 18450-65010, 18450-65030, 18450-73040. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
  • OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
  • High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
  • Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
  • Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
  • Providing Assurance Of Genuine Compliance While Delivering Quality That Will Last
  • Durable 308 stainless steel MIG welds

This Part Fits:

Year Make Model Submodel
1988 Chevrolet Nova Base
1988 Chevrolet Nova CL
1988 Chevrolet Nova Twin Cam
1989-1997 Geo Prizm Base
1990-1992 Geo Prizm GSi
1991-1997 Geo Prizm LSi
1985-1989 Toyota 4Runner DLX
1985-1995 Toyota 4Runner SR5
1983-1986 Toyota Camry DLX
1983-1986 Toyota Camry LE
1986,1994-1999 Toyota Celica GT
1986,1990-1993,1996-1997 Toyota Celica ST
1979-1981 Toyota Celica Supra
1984,1990-1997 Toyota Corolla Base
1997 Toyota Corolla CE
1984-1987,1989-1992 Toyota Corolla DLX
1988-1992 Toyota Corolla DLX All Trac
1993-1997 Toyota Corolla DX
1987 Toyota Corolla FX
1987-1988 Toyota Corolla FX16
1987-1988 Toyota Corolla FX16 GTS
1988-1991 Toyota Corolla GTS
1984-1987,1989-1995,1997 Toyota Corolla LE
1985-1986 Toyota Corolla LE Limited
1985 Toyota Corolla Sport DLX
1985-1987 Toyota Corolla Sport GTS
1988-1991 Toyota Corolla SR5
1988-1990 Toyota Corolla SR5 All Trac
1985-1988 Toyota Cressida Luxury
1985-1989 Toyota MR2 GT
1988-1989 Toyota MR2 Super Charged
1992-1995 Toyota Paseo Base
1984-1995 Toyota Pickup Base
1986-1987 Toyota Pickup Base Turbo
1984-1995 Toyota Pickup DLX
1985 Toyota Pickup DLX Turbo
1984-1990,1992-1993 Toyota Pickup SR5
1985-1988 Toyota Pickup SR5 Turbo
1981-1982 Toyota Starlet Base
1995-2000 Toyota Tacoma Base
1998 Toyota Tacoma DLX
2000 Toyota Tacoma Limited
1998-2000 Toyota Tacoma Pre Runner
1998-2000 Toyota Tacoma SR5
1980-1982,1991-1994 Toyota Tercel DLX
1991-1994 Toyota Tercel LE
1980-1982 Toyota Tercel SR5
1980-1982,1991-1994 Toyota Tercel STD
1984-1989 Toyota Van Wagon Crg
1984-1989 Toyota Van Wagon DX
1984-1989 Toyota Van Wagon LE

Customer Reviews

Overall rating: 4.7 / 5 from 529 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕