📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 45
Magnaflow

MagnaFlow Universal Catalytic Converter 2.25 inch T2 Rear

SKU: MAG334105
$199.99
  • Make: Universal

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 334105. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
  • Expertly Formulated Catalyst Blend Maximizes Efficiency; Ensuring Optimal Emissions Control To Keep Your Light Off
  • High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
  • Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
  • Compact; Lightweight Construction Enables Installation In Confined Areas; Welding Is Required
  • Compact, lightweight construction enables installation in confined areas, welding is required
  • Durable 308 stainless steel MIG welds

This Part Fits:

Year Make Model Submodel
1986 Dodge Ram 50 Custom
1986 Dodge Ram 50 Sport
1986-1995 Ford Aerostar Base
1988-1994 Ford Aerostar Eddie Bauer
1986-1994 Ford Aerostar XL
1989-1994 Ford Aerostar XL Plus
1991-1994 Ford Aerostar XL Sport
1986-1995 Ford Aerostar XLT
1989-1995 Ford Aerostar XLT Plus
1991-1995 Ford Aerostar XLT Sport
1988-1990 Ford Bronco II Eddie Bauer
1988-1990 Ford Bronco II XL
1988-1990 Ford Bronco II XL Sport
1988-1990 Ford Bronco II XLT
1989-1990 Ford Bronco II XLT Plus
1995 Ford Explorer Eddie Bauer
1995 Ford Explorer Expedition
1995 Ford Explorer Limited
1995 Ford Explorer Sport
1995 Ford Explorer XL
1995 Ford Explorer XLT
1983 Ford F-100 Base
1980-1982 Ford F-100 Custom
1980-1981 Ford F-100 Ranger
1980-1981 Ford F-100 Ranger Lariat
1980-1981 Ford F-100 Ranger XLT
1982-1983 Ford F-100 XL
1982-1983 Ford F-100 XLS
1982-1983 Ford F-100 XLT Lariat
1995 Ford F-150 Eddie Bauer
1994-1995 Ford F-150 Lightning
1995 Ford F-150 Special
1994-1995 Ford F-150 XL
1994-1995 Ford F-150 XLT
1983 Ford F-250 Base
1981-1982 Ford F-250 Custom
1981 Ford F-250 Ranger
1981 Ford F-250 Ranger Lariat
1981 Ford F-250 Ranger XLT
1982-1983 Ford F-250 XL
1982-1983 Ford F-250 XLS
1983 Ford F-250 XLT
1982 Ford F-250 XLT Lariat
1983 Ford F-350 Base
1981-1982 Ford F-350 Custom
1981 Ford F-350 Ranger
1981 Ford F-350 Ranger Lariat
1981 Ford F-350 Ranger XLT
1982-1983 Ford F-350 XL
1982-1983 Ford F-350 XLS
1983 Ford F-350 XLT
1982 Ford F-350 XLT Lariat
1988,1990-1992 Ford Ranger Custom
1988 Ford Ranger GT
1988,1990-1992 Ford Ranger S
1990 Ford Ranger S Plus
1993-1994 Ford Ranger Splash
1991-1993 Ford Ranger Sport
1988,1990-1994 Ford Ranger STX
1993-1994 Ford Ranger XL
1988,1990-1994 Ford Ranger XLT
1994-1995 Honda Passport DX
1994-1995 Honda Passport EX
1994-1995 Honda Passport LX
1993-1994 Isuzu Pickup S
1993-1995 Isuzu Rodeo LS
1993-1995 Isuzu Rodeo S
1986-1987 Mazda B2000 Base
1986-1987 Mazda B2000 LX
1986-1987 Mazda B2000 SE-5
1987-1993 Mazda B2200 Base
1990-1993 Mazda B2200 LE-5
1987-1989 Mazda B2200 LX
1987-1993 Mazda B2200 SE-5
1987-1988 Mazda B2600 Base
1987-1988 Mazda B2600 LX
1987-1988 Mazda B2600 SE-5
1994 Mazda B3000 Base
1994 Mazda B3000 SE
1994 Mazda B4000 LE
1994 Mazda B4000 SE
1995 Mazda MPV L
1995 Mazda MPV LX
1995 Mazda MPV LXE
1994 Mazda MPV Passenger
1992-1994 Mazda Navajo DX
1991-1994 Mazda Navajo LX
1994-1995 Mercury Villager GS
1994-1995 Mercury Villager LS
1994-1995 Mercury Villager Nautica
1985-1986 Mitsubishi Mighty Max Base
1985 Mitsubishi Mighty Max SP
1986 Mitsubishi Mighty Max Sport
1985-1986 Mitsubishi Mighty Max SPX
1995 Mitsubishi Montero LS
1994-1995 Nissan Quest GXE
1994-1995 Nissan Quest XE
1994-1995 Toyota Previa DX
1994-1995 Toyota Previa LE

Customer Reviews

Overall rating: 4.7 / 5 from 529 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕