📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 50
Magnaflow

MagnaFlow Direct Fit Catalytic Converter CALIBER- 07-09 2.4L OEM

SKU: MAG49192
$604.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49192. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2007-2017 Jeep Patriot, 2007-2017 Jeep Compass, and more, this direct-fit catalytic converter also interchanges with OE parts 6806 6677AE and 6806 6677AA, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Technical Bulletin
Technical Bulletin
Technical Bulletin
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
  • Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
  • OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
  • High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
  • Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
  • Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
  • Your Trusted Source For EPA-Compliant Catalytic Converters
  • Mandrel Bent Tubing Retains Oem-Like Design And Geometry
  • Durable 308 stainless steel MIG welds

This Part Fits:

Year Make Model Submodel
2011-2014 Chrysler 200 Limited
2011-2014 Chrysler 200 LX
2011-2014 Chrysler 200 Touring
2007 Chrysler Sebring Base
2007-2010 Chrysler Sebring Limited
2008-2010 Chrysler Sebring LX
2007-2010 Chrysler Sebring Touring
2010-2011 Dodge Avenger Express
2011 Dodge Avenger Lux
2011 Dodge Avenger Mainstreet
2009-2010 Dodge Avenger R/T
2008-2009,2012-2014 Dodge Avenger SE
2008-2010,2012-2014 Dodge Avenger SXT
2010-2011 Dodge Caliber Express
2010-2011 Dodge Caliber Heat
2010-2011 Dodge Caliber Mainstreet
2007-2010 Dodge Caliber R/T
2010-2011 Dodge Caliber Rush
2007-2010,2012 Dodge Caliber SE
2008-2009 Dodge Caliber SRT-4
2007-2010,2012 Dodge Caliber SXT
2012 Dodge Caliber SXT Plus
2010-2011 Dodge Caliber Uptown
2012-2013,2015 Dodge Journey AVP
2010 Dodge Journey Base
2014-2020 Dodge Journey Crossroad
2011 Dodge Journey Express
2009-2010,2012-2019 Dodge Journey SE
2020 Dodge Journey SE Value
2012-2018 Dodge Journey SXT
2016 Jeep Compass 75th Anniversary
2015 Jeep Compass Altitude
2011 Jeep Compass Base
2015 Jeep Compass High Altitude
2011-2017 Jeep Compass Latitude
2007-2015 Jeep Compass Limited
2007-2010,2012-2017 Jeep Compass Sport
2016 Jeep Patriot 75th Anniversary
2011-2017 Jeep Patriot Latitude
2011 Jeep Patriot Latitude X
2007-2010,2012-2015 Jeep Patriot Limited
2007-2017 Jeep Patriot Sport

Customer Reviews

Overall rating: 4.7 / 5 from 527 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕