📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 3
QA1

QA1 64-72 GM A/G-Body Pro Rear Coil-Over System - Single Adj. - 12in x 170lbs/in - Aluminum

SKU: QAPRCK52341
$942.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

QA1 offers bolt-in Rear Coil-Over Conversion Kits for 1964-1972 GM A-body vehicles. These kits include specially designed USA made mounting brackets and single or double adjustable aluminum shocks, high travel springs and all necessary hardware. Single adjustable shocks provide 18 positions of simultaneous rebound and compression adjustment while QA1's double adjustable shocks provide 18 positions of compression adjustment and 18 positions of rebound adjustment, for a total of 324 possible valving combinations. These shocks also utilize a fully threaded body allowing for ride height adjustability. Multiple spring rate options are also available, and have been successfully tested in various applications, from casual street driving to hard core race applications. With our highly popular adjustable front coil-over kits and the addition of the rear coil-over conversion kit, you can now get a complete suspension makeover for both ends of the vehicle. These lightweight billet aluminum coil-over shocks are made in the USA and offer easy, bolt-in installation and ride height adjustability. They are 100% dyno tested and serialized and serviceable and rebuildable by QA1 authorized service centers. Used in drag racing, street performance, autocross, road racing and street rod applications. Conversion Kit Note: Later model vehicles tend to weigh more on average. Please take this into account when ordering springs.

Installation Instructions
  • Ultimate balance of ride quality and performance handling with adjustable rebound and compression valving.
  • Achieve 1/2 higher than stock down to 2.25" lower than stock.
  • Limited Lifetime Warranty for peace of mind.
  • Proudly made in the USA.
  • Sold as a pair.

This Part Fits:

Year Make Model Submodel
1965-1967 Buick Gran Sport Base
1970,1972 Buick Skylark 350
1964-1972 Buick Skylark Base
1968-1972 Buick Skylark Custom
1964-1969 Buick Special Base
1964-1967 Buick Special Deluxe
1964-1968 Chevrolet Chevelle 300
1965-1969 Chevrolet Chevelle 300 Deluxe
1970-1972 Chevrolet Chevelle Base
1967-1972 Chevrolet Chevelle Concours
1969-1972 Chevrolet Chevelle Concours Estate
1969-1972 Chevrolet Chevelle Greenbrier
1971-1972 Chevrolet Chevelle Heavy Chevy
1964-1972 Chevrolet Chevelle Malibu
1964-1965 Chevrolet Chevelle Malibu Super Sport
1968-1972 Chevrolet Chevelle Nomad
1968 Chevrolet Chevelle Nomad Custom
1971-1972 Chevrolet Chevelle SS
1967-1970 Chevrolet Chevelle SS 396
1970 Chevrolet Chevelle SS 454
1966 Chevrolet Chevelle Super Sport 396
1964-1972 Chevrolet El Camino Base
1968-1972 Chevrolet El Camino Custom
1968-1972 Chevrolet El Camino SS
1970-1972 Chevrolet Monte Carlo Base
1971-1972 GMC Sprint Base
1972 GMC Sprint Custom
1964-1971 Oldsmobile 442 Base
1964-1972 Oldsmobile Cutlass Base
1972 Oldsmobile Cutlass Cruiser
1964-1967 Oldsmobile Cutlass Holiday
1968,1971-1972 Oldsmobile Cutlass S
1967 Oldsmobile Cutlass Turnpike Cruiser
1964-1972 Oldsmobile Vista Cruiser Base
1964-1967 Oldsmobile Vista Cruiser Custom
1969-1972 Pontiac Grand Prix Base
1964-1972 Pontiac GTO Base
1970-1971 Pontiac GTO The Judge
1964-1972 Pontiac LeMans Base
1972 Pontiac LeMans Luxury
1969-1970 Pontiac LeMans Safari
1970-1972 Pontiac LeMans Sport
1971 Pontiac LeMans T37
1964-1970 Pontiac Tempest Base
1964-1969 Pontiac Tempest Custom
1970 Pontiac Tempest GT
1964-1969 Pontiac Tempest Safari

Customer Reviews

Overall rating: 4.7 / 5 from 527 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕