📱 Call Us

FSD26 IS LIVE: Every $1 spent = 150 entries to win a 2024 F-350 Limited + $20,000 cash.
Skyjacker

Skyjacker 19-26 Chevrolet 1500 Trail Boss 1.5 in. Suspension Leveling Kit w Upper Control Arms

SKU: SKYC19150
$553.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us
82950 Entries150X
This purchase enters you to win the FSD26 truck: a 2024 F-350 Limited + $20,000 cash. Ends October 18. See the truck

Skyjackers 1.5-Inch Suspension Leveling Kit gets you more performance and elevate your off-road ready stance. Raising the suspension to run larger, more aggressive tires will add more ground clearance. Skyjacker fabricated the Replacement Upper Control Arm (UCA) out of high weld strength, thick walled DOM steel tubing to withstand extreme amounts of stress and loads. For additional rigidity and strength, a welded gusset plate stiffens the arm and bushing eyelets into one. CNC machined bushing eyelets and ball joint cups ensure precise fitment. Skilled technicians assemble Skyjackers exacting CNC laser cutting, bending and machining procedures to our calculated engineering specifications. The steel encased OEM style rubber bushings deliver a quiet consistent controlled stability and smooth riding comfort. The greasable ball joints full induction ball design, low friction bearing technology and other technical performance characteristics add longevity and increased strength. Engineered with built-in camber correction for improved handling, this system integrates smoothly and functions perfectly allowing the CV axles to operate within limits of new UCA and OEM lower control arms. The replacement UCA comes completely preassembled and ready to install with a durable powder coat finish. Retain your front OEM tuned performance struts with strut spacers. A combination of Preload and Upper Strut Mount Spacers distributes the lift load more evenly and prevents CV axle overextension within the OEM tolerances. Aligns to OEM factory specifications. Works with Electric Power Assisted Steering (EPAS) system.

  • Specifically Engineered To Maintain Proper Suspension Geometry
  • Straightforward Installation - Simple Sensible Instructions
  • Built-In Camber Correction And Optimized Ball Joint Angles
  • Prevents CV Axle Overextension Within The OEM Tolerances
  • More Aggressive Off-Road Stance At An Affordable Price
  • UCA Pressed-in OEM Style Steel Encased Rubber Bushings
  • Matching Set Of Front Preload And Upper Strut Spacers
  • Gain A More Controlled Handling Feel On And Off-Road
  • Durable Components Deliver A Dependable Dynamic Lift
  • UCA Pressed-in HD OEM Grade Greasable Ball Joints
  • Bold / Commanding Look With Built-In Performance
  • Heavy Duty DOM Steel Tubular Upper Control Arms

This Part Fits:

Year Make Model Submodel
2019-2026 Chevrolet Silverado 1500 Custom Trail Boss
2019-2026 Chevrolet Silverado 1500 LT Trail Boss
2022-2026 Chevrolet Silverado 1500 ZR2
2019-2026 GMC Sierra 1500 AT4
2022-2026 GMC Sierra 1500 AT4X

Customer Reviews

Overall rating: 4.7 / 5 from 537 reviews.

Customer photo review of FSD 1998.5- Present 24V Cummins Clamp Lock Head Stud Kit

First off super happy with the product from quality to fit. This was my first install and it was quite easy all the necessary hardware was there. I was looking for mid price head studs and I’ll say I love them I have a 100% and a s480 I’ve had no problems with it and I beat on it every day. 10/10 recommend.

Jacob O. 5/5 Verified

FSD 1998.5- Present 24V Cummins Clamp Lock Head Stud Kit

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕