📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
1 13
Truxedo

Truxedo 17-20 Ford F-250/F-350/F-450 Super Duty 6ft 6in Pro X15 Bed Cover

SKU: TRX1479101
$600.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

The RealTruck TruXedo(R) Pro X15 is the quietest, most refined soft folding tonneau cover on the market—it never flaps in the wind. Built for truck owners who crave sleek, ultra-low-profile styling without sacrificing durability, the Pro X15 is crafted from premium materials and features innovative design elements for a lifetime of quiet performance. At the core of the Pro X15 is the no-flap, 5-layer RTxTechWeave(TM) overlay. This textured, 120-grade composite stretches tighter than traditional vinyls, eliminating flapping for a quiet ride. Specially designed 15-degree side rails position the cover nearly flush with your bed rails, minimizing drag, reducing flapping, and delivering a sleek appearance that's 33 percent lower profile than the [Lo Pro](https://realtruck.com/p/truxedo-lo-pro-tonneau-cover/). Our patented DriveTight(TM) tension control system is the icing on the cake, providing an always-tight, no-flutter fit with no need for manual adjustments for the life of the cover. RTxGrip(TM) multi-tiered hook-and-loop holds on strong and stays closed in all conditions. Beneath the RTxTechWeave overlay, exclusive aluminum cross-frame reinforcements are stronger than cheap imports and help prevent sagging from rain, hail, or snow. Operation is effortless—open the cover with just one finger using the easy trigger latch. The cover rolls tight, stays straight, and aligns perfectly whether open or closed with exclusive stay-straight controls. When full bed access is required, the patented quick-release handle allows full removal in seconds with no tools required. Installation is quick and easy with a clamp-on, no-drill system. Proven in extreme climates from Alaska to Florida, the Pro X15 has been tested from -40 to 180ºF and up to 95 percent humidity. The TruXedo Pro X15 is proudly assembled in the USA and backed by a limited lifetime warranty.

Owner's Manual
Installation Instructions
  • LOWER PROFILE MINIMIZES WIND DRAG: Specially designed 15-degree side rails position the cover nearly flush to the bed rails—33% lower profile than Lo Pro—reducing flapping and wind noise.
  • QUIET RIDE FOR LIFE: We invented the DriveTight™ tension control system to provide an always-tight, no-flutter fit with no need for manual adjustments for the life of the cover.
  • NO-FLAP 5-LAYER RTxTECHWEAVE: Textured 120-grade RTxTechWeave™ with 5-layer composite stretches tighter than other materials to eliminate flapping for a quiet ride.
  • STRONGER CROSS-FRAMES THAN CHEAP IMPORTS: Exclusive aluminum cross-frame reinforcements prevents sagging under rain, hail, and snow.
  • PATENTED RTxGRIP™ STAYS CLOSED: Patented RTxGrip™ multi-tiered hook-and-loop holds on strong and stays closed in all conditions.
  • HASSLE-FREE WARRANTY?: Limited Lifetime Warranty supported by dedicated product experts and customer service team based in the USA.
  • OPEN WITH JUST ONE FINGER: Easy-to-use trigger latch releases with one finger, allowing the cover to open with ease.
  • INSTALL IN UNDER 30 MINUTES: Quick and easy one-person install in under 30 minutes with minimal tools required.
  • Simple Installation And Use No Drilling Or Special Tools Required
  • Self-Leveling Design Allows For Faster More Accurate Installation
  • Quick Release System Allows The Cover To Be Removed In Seconds
  • Superior-Grade Matte Black Fabric Provides A Stylish Look
  • X15 Rails Provide A Distinctive Flush Mount Look
  • True 100 Percent Full Bed Access
  • Lifetime Warranty
  • Made In The USA

This Part Fits:

Year Make Model Submodel
2017-2026 Ford F-250 Super Duty King Ranch
2017-2026 Ford F-250 Super Duty Lariat
2018-2024 Ford F-250 Super Duty Limited
2017-2026 Ford F-250 Super Duty Platinum
2017-2026 Ford F-250 Super Duty XL
2017-2026 Ford F-250 Super Duty XLT
2017-2026 Ford F-350 Super Duty King Ranch
2017-2026 Ford F-350 Super Duty Lariat
2018-2024 Ford F-350 Super Duty Limited
2017-2026 Ford F-350 Super Duty Platinum
2017-2026 Ford F-350 Super Duty XL
2017-2026 Ford F-350 Super Duty XLT

Customer Reviews

Overall rating: 4.7 / 5 from 527 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕