📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
Zone Offroad

Zone Offroad 2in Lift Blocks (Pair) 5/8in Pin

SKU: ZORZONU3021
$30.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

These high quality 2" cast iron lift blocks are specially designed to lift the rear of leaf spring trucks. They come finished in a black e-coating and use a tapered design to help improve pinion angle once installed. Uses 5/8" pin size. Sold in pairs.

  • Standard 5/8" male pins with 11/16" female
  • CNC-machined for proper pin placement
  • Black powder coated
  • Cast in the USA
  • Sold in pairs

This Part Fits:

Year Make Model Submodel
1978-1993 Ford Bronco Custom
1985-1996 Ford Bronco Eddie Bauer
1978 Ford Bronco Northland
1978-1981 Ford Bronco Ranger XLT
1990-1996 Ford Bronco XL
1982-1983 Ford Bronco XLS
1984-1992,1994-1996 Ford Bronco XLT
1982-1983,1993 Ford Bronco XLT Lariat
1992 Ford Bronco XLT Nite
1995-1996 Ford Bronco XLT Sport
2003-2004 Ford Excursion Eddie Bauer
2000-2004 Ford Excursion Limited
2004 Ford Excursion XLS
2000-2004 Ford Excursion XLT
1976-1978,1983-1986,1997-2000 Ford F-150 Base
1975-1982,1987-1992 Ford F-150 Custom
1995-1996 Ford F-150 Eddie Bauer
2000-2003 Ford F-150 Harley-Davidson Edition
2001-2003 Ford F-150 King Ranch
1997-2003 Ford F-150 Lariat
1993-1995,1999-2003 Ford F-150 Lightning
1975-1978 Ford F-150 Northland
1975-1981 Ford F-150 Ranger
1978-1981 Ford F-150 Ranger Lariat
1975-1981 Ford F-150 Ranger XLT
1995-1996 Ford F-150 Special
1982-2003 Ford F-150 XL
1982-1983 Ford F-150 XLS
1977,1983-1984,1993-2003 Ford F-150 XLT
1982,1985-1992 Ford F-150 XLT Lariat
2009-2010 Ford F-250 Super Duty Cabela's
2008-2009 Ford F-250 Super Duty FX4
2004-2010 Ford F-250 Super Duty Harley-Davidson Edition
2004-2011 Ford F-250 Super Duty King Ranch
1999-2011 Ford F-250 Super Duty Lariat
1999-2011 Ford F-250 Super Duty XL
1999-2011 Ford F-250 Super Duty XLT
2009-2010 Ford F-350 Super Duty Cabela's
2008-2009 Ford F-350 Super Duty FX4
2004-2010 Ford F-350 Super Duty Harley-Davidson Edition
2003-2011 Ford F-350 Super Duty King Ranch
1999-2011 Ford F-350 Super Duty Lariat
1999-2011 Ford F-350 Super Duty XL
1999-2011 Ford F-350 Super Duty XLT
2014 Toyota Tundra 1794 Edition
2007-2013 Toyota Tundra Base
2007-2014 Toyota Tundra Limited
2010-2014 Toyota Tundra Platinum
2014 Toyota Tundra SR
2007-2011,2014 Toyota Tundra SR5

Customer Reviews

Overall rating: 4.7 / 5 from 525 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

Customer photo review of XDP Wrinkle Black HD High Output Alternator 1999-2003 Ford 7.3L Powerstroke XD356

Had this thing for just over a month now. My 7.3 had the small housing alternator from factory so I needed to use the spacers. Using the spacers makes the belt slightly harder to get back on so I would recommend going up 1/2" on the belt size. Otherwise I have no issue, powers the truck just fine for the last 1000 miles.

Gunther B. 4/5 Verified

XDP Wrinkle Black HD High Output Alternator 1999-2003 Ford 7.3L Powerstroke XD356

⌕