📱 Call Us

FSD25 WINNER: Emerson Garcia, Gonzales, LA. BMT #3 WINNER: Eric Dassinger, Wichita Falls, TX.
All Balls Racing

All Balls Racing 1990 Kawasaki KX125 Fork Oil Seal & Dust Seal Kit

SKU: ABR56-129
$40.99

Not sure which part you need, or want to make sure it's in stock?

Give us a call. You won't get a robot, you'll get straight through to a real person who knows diesel.

📱 Call Us

The seal profile is engineered so that each seal lip places equal pressure on the fork tube; equalized seal pressure creates less drag and longer seal life.

  • The seal incorporates a third seal lip which acts as an additional dust wiper to keep the fork tubes clean of dirt and grit
  • Dust seals features external garter springs to keep the fork tubes clean
  • Includes two fork seals and two dust seals
  • Dyno tested 3x to 4x stronger than OEM

This Part Fits:

Year Make Model Submodel
2022-2024 BMW G310R Base
2000-2007 Honda VT1100C2 Shadow Sabre Base
2004-2009,2011-2016,2018-2019 Honda VT750C Shadow Aero Base
2007-2009,2012-2014 Honda VT750C2 Shadow Spirit Base
2010-2019 Honda VT750C2B Shadow Phantom Base
2015-2019 Kawasaki EN650 Vulcan S Base
2009-2010 Kawasaki ER-6N Base
2006-2011 Kawasaki EX650 Ninja 650R Base
1993-1994 Kawasaki KDX200 Base
2022 Kawasaki KLR650 Adventure Base
1990 Kawasaki KX125 Base
1990 Kawasaki KX250 Base
1990 Kawasaki KX500 Base
1979-1982 Kawasaki KZ1300 Base
2004-2006,2011 Kawasaki Z750 Base
2005-2006 Kawasaki Z750S Base
2018 Kawasaki Z900RS Base
1986-2006 Kawasaki ZG1000 Concours Base
1983-1988 Kawasaki ZN1300 Voyager Base
2000 Kawasaki ZR-7 Base
2001-2003 Kawasaki ZR-7S Base
1995-1997 Kawasaki ZX600 Ninja ZX-6R Base
2003-2004 Kawasaki ZX636 Ninja ZX-6R Base
1993-1995 Kawasaki ZX750 Ninja ZX-7 Base
1991-1994 Kawasaki ZX750 Ninja ZX-7R Base
1994-1997 Kawasaki ZX900 Ninja ZX-9R Base
2003-2009 Suzuki AN400 Burgman Base
2003-2009 Suzuki AN650 Burgman Base
1991-1993 Suzuki GSF400 Bandit Base
1996-2003 Suzuki GSF600S Bandit Base
2024 Suzuki GSX-8R Base
2024 Suzuki GSX-8S Base
1986-1988,1991-1994 Suzuki GSX-R1100 Base
1986-1987 Suzuki GSX-R750 Base
2008-2009 Suzuki GSX650F Base
1985-1986 Suzuki GV1200 Madura Base
1986-1988 Suzuki GV1400 Cavalcade Base
1990 Suzuki RM125 Base
1989-1990 Suzuki RM250 Base
1989-1990 Suzuki RMX250 Base
1999-2002 Suzuki SV650 Base
1990-1993 Suzuki VX800 Base
1997-2004 Suzuki VZ800 Marauder Base
2002-2008 Triumph America Base
2006-2008 Triumph Bonneville Base
2017-2021 Triumph Bonneville Bobber Base
2018-2021 Triumph Bonneville Speedmaster Base
2002-2015,2017-2024 Triumph Bonneville T100 Base
2017-2024 Triumph Bonneville T120 Base
2006-2014,2016 Triumph Daytona 675 Base
2006-2008 Triumph Scrambler Base
2024 Triumph Scrambler 900 Base
2023-2024 Triumph Speed Twin 900 Base
2003-2008 Triumph Speedmaster Base
2017-2019 Triumph Street Cup Base
2017-2022 Triumph Street Scrambler Base
2008-2013 Triumph Street Triple 675 Base
2013,2017 Triumph Street Triple R Base
2016-2018,2020-2022 Triumph Street Twin Base
2016-2019 Triumph Thruxton 1200 Base
2015-2016 Yamaha FJ-09 Base
1984-1985 Yamaha FJ1100 Base
1986-1993 Yamaha FJ1200 Base
2015-2017 Yamaha FZ-07 Base
2014-2017 Yamaha FZ-09 Base
2016-2017 Yamaha FZ6R Base
1987-1988,1991-1993 Yamaha FZR1000 Base
2018-2021 Yamaha MT-09 Base
2019 Yamaha Tracer 900 Base
2019-2020 Yamaha Tracer 900 GT Base
1992 Yamaha WR200 Base
2018-2024 Yamaha XSR700 Base
2016-2021,2023-2024 Yamaha XSR900 Base
2014-2020 Yamaha XVS950 Bolt Base
2005-2010,2012-2013 Yamaha YP400 Majesty Base
1989-1990 Yamaha YZ125 Base
1989-1990 Yamaha YZ250 Base
1998-2001 Yamaha YZF-R1 Base
2015-2018 Yamaha YZF-R3 Base
2005,2016 Yamaha YZF-R6 Base
2022-2024 Yamaha YZF-R7 Base
1995-2007 Yamaha YZF600R Base

Customer Reviews

Overall rating: 4.7 / 5 from 527 reviews.

Customer photo review of FSD 03-09 Dodge Cummins Billet Heat Exchanger

The billet heat exchanger looks great and is machined nicely. No worries about an internal failure allowing fluids to mix. It seems to be doing its job. It's more robust than the factory style cooler but I don’t believe it is quite as efficient based on warm up times I’m seeing. My only gripe is the bracket mounting bolts, they thread directly onto the cooler instead of passing all the way through and securing with nuts. Make sure to use thread locker along with the lock washers. As a rough guide, torque for M8 fasteners in aluminum should be 11-15 ft lbs, no torque spec is listed for the mounting hardware in the instructions.

Charles H. 4/5 Verified

FSD 03-09 Dodge Cummins Billet Heat Exchanger

Customer photo review of FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

It’s not bad, I was in a bind and needed a quick fix to get my truck back going. So first things first, the kit works. You can get rid of the steel lines and these will take their place. With about an hour and a half and a little research it doesn’t take much to get these hoses installed. However, I have some gripes about this kit. 1. You have to be very careful about how the lines are run to prevent the hose from kinking. 2. There are no p clamps or hardware included to hold the lines in place. To improve this kit, I’d toss some hose clamps, a couple bolts with some p clamps to hold the hose, maybe a couple pictures on where to run things too, or even total install instructions. Stiffer hose would be good too, in my pictures you can see that the hose going to the front of the engine is trying to kink as it makes the bend to run beside the turbo.

Noah T. 3/5 Verified

FSD 2003-2007 Dodge Cummins Heater Hose Kit Black Braided

Customer photo review of Kingspeed Billet Front Cover 94-02

It came with no gaskets this item deff needs to be sold with cover gasket as well as the seal for the crank even a plug for the vent or a fitting to hook a tube to the vent. Didn’t come with shit but bolts. Now I got to track everything else down seperatly makes it a pain in the ass. At this point I’d rather have stayed stock

Jacob M. 3/5 Verified

Kingspeed Billet Front Cover 94-02

Customer photo review of FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

I installed them when I built my transmission. Hoses are good quality but fittings felt kind of cheap. Not a bad kit at all. I’d recommend it to anyone. Substantial trans temp difference after putting them on. My trans runs a lot cooler now that I’ve bypassed the heat exchanger. 2012 ram 2500 with 68rfe. 9/10 would recommend. Just be gentle with the fittings

Max F. 4/5 Verified

FSD 2010-2012 Dodge Cummins Factory Replacement Transmission Line Kit Black Braided

Customer photo review of FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

I installed this cooler and a few weeks later got into a wreck that was able to damn near total my truck, the frame is bent in 4 places and it shifted my ranch and bumper a foot. This cooler was the only radiator that survived everything else was destroyed and wrapped around the cooler. I called customer support and was able to order new stainless steel brackets and this cooler will live again. I’m very impressed with the quality and strength of this part and would gladly buy it for another truck.

Fritz G. 5/5

FSD 03-09 Dodge Cummins Elite Drop-In Transmission Cooler Kit

Customer photo review of Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

I love the product. I am just upset that it wasn’t clear it doesn’t come with any hardware. I currently have no clue what barb fittings and hose sizes I need to get for the valve cover to my catch can. I am currently using a hardware store setup as this is my first Cummins and my first quality build of a truck. If there’s anyway you could assist me or point me in the right direction that would be awesome. Aside from that I’ve had nothing but compliments on it, I actually won top 10 truck and SCT x GFP in Nashville a few weeks back. Everyone including myself love the valve cover.

Caleb H. 3/5 Verified

Kingspeed 06-Current Dodge Ram Billet Budget Builder Valve Cover

⌕